I've seen this too with some RealTeks (just last week as a matter of fact); The Foxconn DS42S/DS52S board exhibits this behavior. I haven't tried yet with an ISO or a USB Stick, but it looks like a possible bug in UNDI somewhere. I've got the serial port debugging setup completed hardware-wise. Need a little help getting the debugging options working in the Compile Options.
On Sun, Jan 20, 2013 at 11:41 AM, Marek Salwerowicz <[email protected]> wrote: > W dniu 2013-01-20 18:34, Marek Salwerowicz pisze: > > everytime I was trying to boot the 'undionly.kpxe' the result was the >> same: >> https://www.dropbox.com/s/**73rwxv90nxl6gc3/Photo%2020.01.** >> 2013%2017%2035%2043.jpg<https://www.dropbox.com/s/73rwxv90nxl6gc3/Photo%2020.01.2013%2017%2035%2043.jpg> >> >> And it was hanging at 'initializing devices' >> > > I forgot about that everytime it stopped, in TFTP log appeared: > > tftpd[27164]: Got ERROR packet: TFTP Aborted > > so probably there is some issue with TFTP support in Realtek cards? > > > > -- > Marek Salwerowicz > > ______________________________**_________________ > ipxe-devel mailing list > [email protected] > https://lists.ipxe.org/**mailman/listinfo.cgi/ipxe-**devel<https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel> > -- There is never time enough to do it right, but there always seems to be enough time to do it again.
_______________________________________________ ipxe-devel mailing list [email protected] https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
