Ah, that is actually what I initially wanted to do, as that is basically how I do it with a BIOS-supported iSCSI boot, but I wasn't sure it was possible. I didn't realize I could connect the target in iPXE and exit and then still boot the RHEL CD and have the target remain connected. I'll try it, thanks!
-Joe From: Matthew Helton [mailto:[email protected]] Sent: Thursday, May 09, 2013 6:17 PM To: Gruher, Joseph R; [email protected] Subject: Re: [ipxe-devel] Install RHEL to iSCSI Target and Boot From iPXE To me, you are doing it backwards... Boot from iPXE from USB: configure network and mount (Blank) iSCSI Target disk (sanhook) with "keep san 1' and then exit iPXE to boot from the RHEL CD-ROM. On Thu, May 9, 2013 at 8:12 PM, Gruher, Joseph R <[email protected]<mailto:[email protected]>> wrote: Hello- I am trying to boot RHEL6.4 over iSCSI using iPXE to start the boot process. I've done this before on boards which had BIOS iSCSI boot support and it works fine so I know RHEL6.4 supports iSCSI boot. However, I can't quite seem to get it to work with iPXE. My process is: 1. Boot RHEL installer from ISO 2. Mount iSCSI target using iSCSI support in installer GUI 3. Install RHEL as usual, no special settings 4. Reboot and boot from iPXE on USB key 5. Use iPXE script to configure network interface and sanboot from iSCSI target It almost works... iPXE is able to configure the network and connect the target and begin the boot process. I can actually see RHEL loading for a while so I know boot has begun. However, before boot completes, it crashes as shown in the attached screenshot. My theory is this is happening when the iSCSI connection is handed off from iPXE to the native iSCSI initiator in RHEL, but that is just a guess, I don't really have any evidence for that being the case. Is this a known problem? Any known tips or tricks or workarounds I might try? Thanks! -Joe _______________________________________________ ipxe-devel mailing list [email protected]<mailto:[email protected]> https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel -- There is never time enough to do it right, but there always seems to be enough time to do it again.
_______________________________________________ ipxe-devel mailing list [email protected] https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
