Hi brandon, If i use the same files with TFTP + boot PXE, there is no problem. Winpe load correctly. All drivers (Lan, Storage, chipset) are ok Same if i'm trying to boot the same image with USB stick. I already use this winpe image to boot and install my desktops.
I can also Boot Ipxe with the same files on my other motherboard. But with DH67BL and DH61AG system reboot directly after winpe loading screen > Date: Wed, 29 May 2013 21:35:33 -0400 > From: [email protected] > To: [email protected] > CC: [email protected] > Subject: Re: [ipxe-devel] Ipxe + wimboot + winpe issue > > <snip> > > > > However i have some trouble with some motherboard like Intel DG61AG > > and Intel DH67BL/VR. Lan chipset is Intel 82579V for both. > > > > I use the same Ipxe script, source and the last Wimboot version, but > > with those motherboards, my computer reboot after Boot.wim load. The > > Winpe loading screen appear shortly, and reboot few second later. > > > <snip> > > This sounds like Windows PE is missing the NIC driver. I know for a > fact that Windows 7 (PE 3.5/AIK, iirc), does not have the driver for the > 82579 built in. I don't recall Windows 8 (PE 4.0/ADK) off the top of my > head, but I think it needs to be added as well. > I do know that what you are describing is what typically happens when > the wpeinit fails due to not bringing up the NIC. > Hopefully this can help point you in the right direction. > > Brandon
_______________________________________________ ipxe-devel mailing list [email protected] https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
