hello Jarrod, I booted into uefi shell, then execute snponly.efi. Thanks, yixuan
On Mon, Jul 15, 2013 at 9:17 PM, Jarrod Johnson <jarrod.b.john...@gmail.com>wrote: > Was this chain booted or booted from ISO? In the latter, that doesn't > quite work at the moment (it assumes the device that was used to boot ipxe > was the snp device desired) > > > On Mon, Jul 15, 2013 at 1:15 AM, Yixuan Huang <yixuan...@gmail.com> wrote: > >> Hello Jarron, >> I have tested today with your patch, and build snponly.efi, but it seems >> not recognized my nics. >> >>> >> xCAT Network Boot Agent >> iPXE 1.0.3-130715(f411d) -- Open source .. >> Features: HTTP HTTPS iSCSI DNS TFTP EFI >> No more network devices >> xNBA initialising devices... ok >> >> >> >> Thanks, >> yixuan >> >> >> On Fri, Jul 12, 2013 at 7:33 AM, Jarrod Johnson < >> jarrod.b.john...@gmail.com> wrote: >> >>> Meant to post to list. In short, snponly.efi can be chainloaded from a >>> PXE boot in UEFI as an application ( >>> https://git.ipxe.org/vendor/xcat/ipxe.git/shortlog) It has a patch not >>> yet accepted into ipxe main. >>> >>> However, you mentioned going from .iso. That needs an extra step. >>> Either an intermediate loader to switch around the loaded image handle >>> prior to execution, or a patch to ipxe shoring up it's support for non-IPXE >>> SNP drivers to go beyond loaded image. I had been hoping to get to the >>> latter, but a combination of not having enough time or intelligence has >>> gotten in the way. >>> >>> >>> On Thu, Jul 11, 2013 at 1:36 AM, Yixuan Huang <yixuan...@gmail.com>wrote: >>> >>>> Oh, don't notice to list. :-） >>>> Thanks Robin >>>> >>>> Hello Guys, >>>> If I want to use ipxe in EFI mode, any easy way to built one? Now, I >>>> have ipxe.efi, snponly,efi, snpnet.efi, 80861521.efi, (my nic is intel >>>> e1000, 8086/1521), but it cannot detect that NIC. >>>> Robin said we can use as EFI driver, Iwant to know how to execute it. >>>> Any documentation? >>>> >>>> Thanks, >>>> yixuan >>>> >>>> >>>> On Wed, Jul 10, 2013 at 9:38 PM, Robin Smidsrød <ro...@smidsrod.no>wrote: >>>> >>>>> I don't know. Please keep the conversation on the list, not in private. >>>>> >>>>> Most likely some of the other people on the list can answer that. I >>>>> also >>>>> believe it's been answered before. Don't remember when. Check the >>>>> mailing-list archives. >>>>> >>>>> -- Robin >>>>> >>>>> On 10.07.2013 12:22, Yixuan Huang wrote: >>>>> > hello Robin, >>>>> > Thanks for your information. >>>>> > But if I want to launch from uefi shell, how can I do? Any >>>>> documentation >>>>> > in ipxe.org <http://ipxe.org>? >>>>> > And do you know if ipxe support as app in the furture? >>>>> > >>>>> > Thanks, >>>>> > Eugene >>>>> > >>>>> > Thanks, >>>>> > yixuan >>>>> >>>>> > >>>>> > >>>>> > On Wed, Jul 10, 2013 at 5:34 PM, Robin Smidsrød <ro...@smidsrod.no >>>>> > <mailto:ro...@smidsrod.no>> wrote: >>>>> > >>>>> > iPXE as an UEFI app doesn't yet work. You'll need to load it as >>>>> a driver >>>>> > or rom, AFAIK. >>>>> > >>>>> > -- Robin >>>>> > >>>>> > On 10.07.2013 09 <tel:10.07.2013%2009>:56, Yixuan Huang wrote: >>>>> > > when I used snponly.efi, (make bin-x86-64/snponly.efi) same >>>>> issue. >>>>> > > >>>>> > > Thanks, >>>>> > > yixuan >>>>> > > >>>>> > > >>>>> > > On Wed, Jul 10, 2013 at 3:27 PM, Yixuan Huang < >>>>> yixuan...@gmail.com >>>>> > <mailto:yixuan...@gmail.com> >>>>> > > <mailto:yixuan...@gmail.com <mailto:yixuan...@gmail.com>>> >>>>> wrote: >>>>> > > >>>>> > > Hello, >>>>> > > I built ipxe.efi in my rhel6.4 platform with git clone >>>>> that latest >>>>> > > code level. >>>>> > > And I enable ftp/https protocols. >>>>> > > >>>>> > > my system is ibm x3650m4, last time when i used pre-build >>>>> binary >>>>> > > ipxe.iso, >>>>> > > network cards can be set and http can work. >>>>> > > >>>>> > > But this time, it seems no nic worked. i first boot from >>>>> > uefi-shell, >>>>> > > then run ipxe.efi. >>>>> > > >>>>> > > screen like following: >>>>> > > ipxe 1.0.0+(9361) ... >>>>> > > Features: FTP HTTP HTTPS DNS TFTP EFI Menu >>>>> > > No more network devices >>>>> > > iPXE initialsing device... >>>>> > > >>>>> > > it will hang... >>>>> > > >>>>> > > question: >>>>> > > * how can i build other nic drivers or which one can >>>>> support >>>>> > all nics? >>>>> > > >>>>> > > >>>>> > > Thanks, >>>>> > > yixuan >>>>> > > >>>>> > > >>>>> > > >>>>> > > >>>>> > > _______________________________________________ >>>>> > > ipxe-devel mailing list >>>>> > > ipxe-devel@lists.ipxe.org <mailto:ipxe-devel@lists.ipxe.org> >>>>> >>>>> > > https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel >>>>> > > >>>>> > >>>>> > _______________________________________________ >>>>> > ipxe-devel mailing list >>>>> > ipxe-devel@lists.ipxe.org <mailto:ipxe-devel@lists.ipxe.org> >>>>> > https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel >>>>> > >>>>> > >>>>> >>>>> >>>> >>>> _______________________________________________ >>>> ipxe-devel mailing list >>>> ipxe-devel@lists.ipxe.org >>>> https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel >>>> >>>> >>> >> >> _______________________________________________ >> ipxe-devel mailing list >> ipxe-devel@lists.ipxe.org >> https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel >> >> >
_______________________________________________ ipxe-devel mailing list ipxe-devel@lists.ipxe.org https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
