I currently have two Intel NUC machines running Windows 7 x64 that use iSCSI only and two other systems that are not the NUCs running the same had and OS setup. I chainload iPXE from the on board pxe and it works great. I personally prefer this method so if I ever choose to update iPXE I only update it on the server and all clients are updated on next boot automatically.
For this to work, there wasn't a single change that needed to be made in the NUC bios. The factory bios settings boot directly to network if there is no other device present. Steve Cross On Jul 25, 2013 11:22 AM, "Anton D. Kachalov" <[email protected]> wrote: > Hello, Marc. > > It depends on BIOS vendor. You may find vendor-specific tools to update > BIOS parts. > > 25.07.2013, 17:40, "Marc Lane" <[email protected]>: > > Afternoon all, > > I have been playing with ipxe rom (80861503) on an Intel NUC via usb. Now > it has come time to try and burn the rom, however bootutil wont burn on > board LOMs/Roms and there is no external ROM on board to burn. > > I then spent a day looking at injecting the rom into the Intel .bio bios, > however I couldn't get the bios check-sums rite to reconstruct the bio and > flash it (ffs file issues). > > I am sure i have read that people have used the NUC for iscsi booting etc. > Any pointers or info on magic versions of bootutil I should be using would > be greatly appreciated. > > Thanks in advance, > -Marc > , > > _______________________________________________ > ipxe-devel mailing list > [email protected] > https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel > > > > -- > Anton D. Kachalov > > ITO, R&D group, System Architect > Tel: +7 (495) 739-70-00 ext.7613 > > _______________________________________________ > ipxe-devel mailing list > [email protected] > https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel > >
_______________________________________________ ipxe-devel mailing list [email protected] https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
