Hi, I am trying to make a rom for Intel PRO/1000 PT with 8086:105E and failed. Is there any specific parameter with Intel NIC?
Attached the build error message. Thank you Build failed. Status = 2build.php:Build options:*Build directory is:*/tmp/MDCROM966kbV $_POST['ofmt'] = "ROM binary (flashable) image (.rom)" $_POST['nic'] = "all-drivers" $_POST['pci_vendor_code'] = "8086" $_POST['pci_device_code'] = "105E" Flags:$flags contains 45 elements: $flags[PRODUCT_NAME]="" $flags[PRODUCT_SHORT_NAME]="iPXE" $flags[CONSOLE_PCBIOS]="on" $flags[CONSOLE_SERIAL]="off" $flags[BANNER_TIMEOUT]="20" $flags[KEYBOARD_MAP]="us" $flags[LOG_LEVEL]="LOG_NONE" $flags[NET_PROTO_IPV4]="on" $flags[COMCONSOLE]="0x3F8" $flags[COMPRESERVE]="off" $flags[COMSPEED]="115200" $flags[COMDATA]="8" $flags[COMPARITY]="0" $flags[COMSTOP]="1" $flags[DOWNLOAD_PROTO_TFTP]="on" $flags[DOWNLOAD_PROTO_HTTP]="on" $flags[DOWNLOAD_PROTO_HTTPS]="off" $flags[DOWNLOAD_PROTO_FTP]="off" $flags[SANBOOT_PROTO_ISCSI]="on" $flags[SANBOOT_PROTO_AOE]="on" $flags[DNS_RESOLVER]="on" $flags[NMB_RESOLVER]="off" $flags[IMAGE_ELF]="on" $flags[IMAGE_NBI]="on" $flags[IMAGE_MULTIBOOT]="on" $flags[IMAGE_PXE]="on" $flags[IMAGE_SCRIPT]="on" $flags[IMAGE_BZIMAGE]="on" $flags[IMAGE_COMBOOT]="on" $flags[AUTOBOOT_CMD]="on" $flags[NVO_CMD]="on" $flags[CONFIG_CMD]="on" $flags[IFMGMT_CMD]="on" $flags[IWMGMT_CMD]="on" $flags[ROUTE_CMD]="on" $flags[IMAGE_CMD]="on" $flags[DHCP_CMD]="on" $flags[SANBOOT_CMD]="on" $flags[LOGIN_CMD]="on" $flags[TIME_CMD]="off" $flags[DIGEST_CMD]="off" $flags[CRYPTO_80211_WEP]="on" $flags[CRYPTO_80211_WPA]="on" $flags[CRYPTO_80211_WPA2]="on" $flags[NETDEV_DISCARD_RATE]="0" Make output:Make command: make -C '/tmp/MDCROM966kbV' 'bin/8086105e.rom' GITVERSION=bf15 2>&1 make: Entering directory `/tmp/MDCROM966kbV' [DEPS] arch/i386/prefix/romprefix.S [DEPS] arch/i386/prefix/mromprefix.S [DEPS] arch/x86/core/debugcon.c [DEPS] arch/i386/interface/vmware/vmconsole.c [DEPS] arch/i386/interface/syslinux/comboot_call.c [DEPS] arch/i386/interface/pcbios/vesafb.c [DEPS] arch/i386/interface/pcbios/bios_smbios.c [DEPS] arch/i386/firmware/pcbios/bios_console.c [DEPS] arch/i386/core/video_subr.c [DEPS] config/config_route.c [DEPS] config/config_romprefix.c [DEPS] config/config_net80211.c [DEPS] config/config_infiniband.c [DEPS] config/config_fc.c [DEPS] config/config_ethernet.c [DEPS] config/config.c [DEPS] usr/imgtrust.c [DEPS] usr/autoboot.c [DEPS] interface/smbios/smbios_settings.c [DEPS] interface/smbios/smbios.c [DEPS] interface/efi/efi_snp_hii.c [DEPS] interface/efi/efi_snp.c [DEPS] interface/efi/efi_smbios.c [DEPS] interface/efi/efi_driver.c [DEPS] interface/efi/efi_console.c [DEPS] net/udp/syslog.c [DEPS] net/tcp/syslogs.c [DEPS] net/tcp/oncrpc.c [DEPS] net/netdevice.c [DEPS] core/serial_console.c [DEPS] core/serial.c [DEPS] core/main.c [DEPS] core/log.c [DEPS] core/image.c [DEPS] core/downloader.c make: Leaving directory `/tmp/MDCROM966kbV' make: Entering directory `/tmp/MDCROM966kbV' [BUILD] bin/downloader.o [BUILD] bin/image.o [BUILD] bin/log.o [BUILD] bin/main.o [BUILD] bin/serial.o [BUILD] bin/serial_console.o make: *** No rule to make target `../.git/index', needed by `bin/version.o'. Stop. make: Leaving directory `/tmp/MDCROM966kbV'
_______________________________________________ ipxe-devel mailing list [email protected] https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
