hi, i'm using iPXE, but only can access a shell, if i compile with options like this:
DEBUG=realtek:1 make bin/10ec8168.rom or: DEBUG=realtek:1 make bin/10ec8169.rom these are the initial debug errors with the DEBUG=realtek:1 option: > iPXE initializgin devices...REALTEK 0x281e4 appears to be an RTL8169 > REALTEK 0x281e4 EEPROM is a 93C46 > REALTEK 0x281e4 EEPROM ID incorrect (0xffff); assuming no EEPROM > REALTEK 0x281e4 PHY status is 88 > ok > > ... > iPXE 1.0.0+ (9bdf) ... > > iPXE> dhcp and ping commands work in debug mode. if i don't use the debug option, i always get stuck at > iPXE initializing devices... upon loading by coreboot. to clarify, if i don't compile with DEBUG, but also embed a script like this: > #!ipxe > > shell > then i don't get the "iPXE initializing devices..." line at all, and get no shell either. maybe in the non-debug mode, iPXE is stricter about warnings and freezes instead of giving a shell or dying. or maybe the debug flag alters the flow of execution. what i would like is to receive the iPXE> shell prompt, even if not using DEBUG mode. thanks so much! -andrew _______________________________________________ ipxe-devel mailing list [email protected] https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
