Hi Wissam, there is no official standard yet for pxe-booting over IPv6. So you have to look into your Bios for IPv6-pxe-availability and configure it for loading a i.e. undionly.kpxe-file via IPv6 over tftp.
Then you can proceed with ipxe in the new IPv6-way. If your network cards supports flashing an ipxe-binary, you can try generating a bootrom for your card. Hth, Oliver Am 09.09.2014 um 10:18 schrieb Wissam Shoukair: > Hi all, > > I’m new to the IPv6 interface in iPXE. How I can boot only over IPv6 ? > > > > Thanks, > > Wissam Shoukair > > > > _______________________________________________ > ipxe-devel mailing list > [email protected] > https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel > -- GreenUnit.UG Agnes-Pockels-Bogen 1 D - 80992 München Tel.: +49 89 8905729-15 Fax: +49 89 8905729-29 mailto:[email protected] Geschäftsführer: Dipl.-Ing. Günter Rath Amtsgericht München, HRB 187881 Internet: www.greenunit.de _______________________________________________ ipxe-devel mailing list [email protected] https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
