On 06/11/14 10:22, Ivan Krutskikh wrote:
Thanks for the IPXE project. So far I had no problems with it in various
san boot scenarios.
Until I tried http://ipxe.org/howto/winpe deploy scenario with a couple
of first generation intel nuc pc's
(http://ark.intel.com/products/71484/Intel-NUC-Kit-DCCP847DY).
I launch the latest ipxe.lkrn from syslinux on a local usb key:
label wimboot
kernel /boot/ipxe.lkrn
append initrd=/boot/boot.ipxe
boot.ipxe :
#!ipxe
dhcp
set netX/gateway 0.0.0.0
sanhook iscsi:192.168.0.242:::1:iqn.2014-06.bootup.mtt:winpe
kernel http://192.168.0.242:8080/boot/wimboot
initrd http://192.168.0.242:8080/media/bcd BCD
initrd http://192.168.0.242:8080/media/boot.sdi boot.sdi
initrd http://192.168.0.242:8080/media/boot.wim boot.wim
boot
This boot option worked on almost any other pc in my office, but on
nuc's it downloads all the defined images, flashes black screen and reboots.
What am I doing wrong here and what can be done to get it fixed?
I would suggest trying to simplify the setup to try to narrow down what
might be causing the problem.
For example, you could try eliminating syslinux and iSCSI by building
bin/ipxe.usb with an embedded script containing
#!ipxe
dhcp
kernel http://192.168.0.242:8080/boot/wimboot
initrd http://192.168.0.242:8080/media/bcd BCD
initrd http://192.168.0.242:8080/media/boot.sdi boot.sdi
initrd http://192.168.0.242:8080/media/boot.wim boot.wim
boot
Also, are you using the current version of wimboot (v2.3.0)?
Michael
_______________________________________________
ipxe-devel mailing list
[email protected]
https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
