On 27/01/16 16:05, Ben Hildred wrote:
I have been going through a stack of ethernet cards getting them ready
to be setup for iPXE boot, collecting pci ids and mac addresses,
checking basic functionality, and making a list of eproms to order and I
hit a snag when a 3c900b-fl is present and a driver for it is compiled
into iPXE the system freezes. I believe the problem is the connector
type forcing,as this is a 10 base fiber card and does not have other
connectors. serial capture follows. mac addresses have been removed.
iPXE initialising devices...no connectors!warning: strange connector
type in EEPROM.
selected utp. (forced)
WARNING: Using legacy NIC wrapper on xxxxxxxx
ok
Given the age and obscurity of the NIC concerned, I think you might be
the only person in a position to try fixing this particular bug.
Michael
_______________________________________________
ipxe-devel mailing list
ipxe-devel@lists.ipxe.org
https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
