This "PCI_ROM ( 0x8086, 0x155a, "i218lm", "I218-LM", 0 )," in src/drivers/net/intel.c line 1064 leads to a link in 10Mbit mode using ipxe.lkrn being chainloaded via Pxelinux V6.03 And then iPXE stops @ "iPXE initializing devices...". If you replace it with " PCI_ROM ( 0x8086, 0x155a, "i218lm", "I218-LM", INTEL_NO_PHY_RST )," the link is up in 1Gbit mode but iPXE still stops with "iPXE initializing devices...".
Rebuiling the patched version with "make DEBUG=intel" leads to following output: "iPXE initializing devices... INTEL 0xd423c forced MAC reset (ctrl 00100260)" "INTEL 0xd423c has autoloaded MAC address 00:xx:xx:xx:xx:xx" (Mac removed but was read correctly) "INTEL 0xd423c link status is 00080480" -->No further progress or output Rebuiling the unpatched version with "make DEBUG=intel" leads to following output: "iPXE initializing devices... INTEL 0xd423c forced MAC reset (ctrl 00100260)" "INTEL 0xd423c has autoloaded MAC address 00:xx:xx:xx:xx:xx" (Mac removed but was read correctly) "INTEL 0xd423c link status is 00080680" -->No further progress or output Tested with git clone commit f0e9e55442023c2f18e62cf74fe9098e0a6f5347 Thomas Miletich successfully tested that in 03/2015 on a Thinkpad T440s. But for me this does not work using iPXE while Pxelinux V6.03 does work including http transfer and successful WinPE boot. I'm stuck here. Can I provide any further help? mit freundlichen Grüßen with kind regards i. A. Dipl.Ing. (FH) Frank Hummel Systementwicklung System development ads-tec GmbH Heinrich-Hertz Str. 1 72622 Nürtingen Germany Tel.: +49 7022 2522-2412 Fax: +49 7022 2522-400 E-Mail: f.hum...@ads-tec.de Web: www.ads-tec.de -----Ursprüngliche Nachricht----- Von: Michael Brown [mailto:mc...@ipxe.org] Gesendet: Mittwoch, 27. Januar 2016 14:10 An: Hummel Frank; ipxe-devel@lists.ipxe.org Betreff: Re: [ipxe-devel] [PATCH 1/1] [intel] Add PCI device IDs for Intel I218-LM and I218-V On 27/01/16 13:01, Hummel Frank wrote: > This "PCI_ROM ( 0x8086, 0x15a0, "i218lm-2", "I218-LM", 0 )," in > src/drivers/net/intel.c line 1066 leads to a link in 10Mbit mode using > ipxe.lkrn. > If you replace it with " PCI_ROM ( 0x8086, 0x15a0, "i218lm-2", "I218-LM", > INTEL_NO_PHY_RST )," the link is up and working in 1Gbit mode. > > Tested with yesterdays git clone commit > f0e9e55442023c2f18e62cf74fe9098e0a6f5347 Applied; thanks! http://git.ipxe.org/ipxe.git/commitdiff/6366fa7 Michael _______________________________________________ ads-tec GmbH Sitz: 72622 Nürtingen Registergericht Stuttgart HRB 224527 Geschaeftsfuehrer: Dipl.-Ing. Thomas Speidel _______________________________________________ Diese E-Mail enthaelt vertrauliche und/oder rechtlich geschuetzte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtuemlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese E-Mail. Das unerlaubte Kopieren, jegliche anderweitige Verwendung sowie die unbefugte Weitergabe dieser Mail sind nicht gestattet. _______________________________________________ This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure, distribution or other use of the material or parts thereof are strictly forbidden. _______________________________________________ _______________________________________________ ipxe-devel mailing list ipxe-devel@lists.ipxe.org https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
