Hi Andre, Am 26.02.2016 um 11:58 schrieb Andre: > Hi, > > > > Found your website and saw that your solution has the possibility to use > wireless PXE. > > > > Currently a customer where I’m working has some new laptops. Of course > these can get their image via standard wired PXE boot. However the > preferred way they want to do this in the future is using wireless. This > because of room and easiness, they don’t need cables anymore. > > > > I have some questions regarding that. Hope that you can help me out on > these questions? > > > > · Is it possible to use iPXE to use a wireless card for PXE boot? > > · Or does this depends on what kind of wireless NIC is being used?
Exactly. You have to flash the card with the ipxe-firmware for enabling this. > > · Does the wireless card has to natively support PXE? No, only with ipxe firmware its possible. > > · The laptop I’m referring to is a HP EliteBook 745 G2. From what > I found it is using a Broadcom wireless card. Looks fine, should be possible. Here is a list of known working hardware: http://ipxe.org/appnote/hardware_drivers > > · If this is possible, how can iPXE being used for this? Take this howto: http://ipxe.org/howto/romburning > > · What needs to be done to get this working? > > · Does this take a lot of effort to be implemented? > I dont know. Regards Oliver _______________________________________________ ipxe-devel mailing list ipxe-devel@lists.ipxe.org https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
