On Wed, Jun 15, 2016 at 2:15 PM, Michael Brown <mc...@ipxe.org> wrote: > On 15/06/16 10:48, Kuniyasu Suzaki wrote: >> >> My iPXE cannot set up NIC on Lenovo P70. > > > Which iPXE binary are you using, and how are you loading it? > > What output do you get from "ifstat"? > > Michael >
Hi Michael I was able to test that the nic discussed in: http://lists.ipxe.org/pipermail/ipxe-devel/2016-April/004910.html works with that change, but did not at the time have an environment to properly test the need for INTEL_NO_PHY_RST for proper gig speed. This is also mentioned at http://forum.ipxe.org/showthread.php?tid=7713 so adding the line + PCI_ROM ( 0x8086, 0x15b7, "i219lm-2", "I219-LM (2)", 0 ), works Note the addition of -2 and (2) as the proper name for this nic. This would probably explain why the nic does not work for Suzaki-san, but busid and type should still be available? Maybe this can be added for now, and I will try to get the I219 nics properly tested in regards to INTEL_NO_PHY_RST when time allows? /Christian _______________________________________________ ipxe-devel mailing list ipxe-devel@lists.ipxe.org https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel