On Fri, Jun 17, 2016 at 06:46:50PM +0000, Prout, Ryan C. wrote: > Hello, > > > I am trying to get iPXE to work with a myricom NIC using this driver > myri10ge and this server HP Proliant DL360 G6. I have successfully used > my iPXE build on another machine but this one keeps giving me issues. > > > I have set the IP, gateway, DNS and confirmed that the proper MAC addrss > is on net0. The net0 interface comes up and has a link but I am unable > to ping anything. I get an error pointing me here ipxe.org/3c0860. >
At http://www.ipxe.org/err/3c0860 is the text | Possible sources | | This error originated from one of the following locations | within the iPXE source code: | | net/netdevice.c (line 1027) | net/netdevice.c (line 1193) The source code line with some context 1024 DBGC ( netdev, "NETDEV %s unknown network protocol %04x\n", 1025 netdev->name, ntohs ( net_proto ) ); 1026 free_iob ( iobuf ); 1027 return -ENOTSUP; 1190 if ( ! netdev_configurator_applies ( netdev, configurator ) ) { 1191 DBGC ( netdev, "NETDEV %s does not support configuration via " 1192 "%s\n", netdev->name, configurator->name ); 1193 return -ENOTSUP; 1194 } > As I proceed to troublshoot, I wanted to take a minute to reach out > and see if you guys had any insight. Nope, I don't have that insight. iPXE is fairly new to me. This e-mail is to change the subject of this thread from a very generic 'iPXE issues' to 'iPXE issues, myri10ge 3c0860' The expansion of error code 3c0860 is done above. Hopefully will this thread get a follow-up on the myri10ge part. Groeten Geert Stappers -- Leven en laten leven _______________________________________________ ipxe-devel mailing list ipxe-devel@lists.ipxe.org https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
