Hello, I have just recently started using iPXE to boot some of our headless systems and one particular piece of older HW always lists "No more network devices" when booting from USB key. When running the PCISCAN command nothing is returned and when navigating the config menu there is nothing populated for PCI or Network configuration. I Have tried other kernels such as tiny core and a simple RHEL instance and both can see the 5 NICs on this server but no luck with the iPXE kernel. Initially I thought this was driver related but the source has the drivers for 8086:105e so I am leaning toward not being able to scan the PCI bus correctly.
Any suggestion on what the problem could be, Bios options to check, or some debugging options to try/enable to see more verbose logs? Thank you, Giabo Sanchies GENERAL DYNAMICS MISSION SYSTEMS - Taunton, MA Software Engineer - Win-T Inc2 This message and/or attachments may include information subject to GDC4S O.M. 1.8.6 and GD Corporate Policy 07-706 and is intended to be accessed only by authorized recipients. Use, storage and transmission are governed by General Dynamics and its policies. Contractual restrictions apply to third parties. Recipients should refer to the policies or contract to determine proper handling. Unauthorized review, use, disclosure or distribution is prohibited. If you are not an intended recipient, please contact the sender and destroy all copies of the original message.
_______________________________________________ ipxe-devel mailing list ipxe-devel@lists.ipxe.org https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
