On 26/11/2018 12:40, Oliver Rath wrote:
And O.P. is not aware that iPXE uses drivers from Linux. [1]
Ok, this I didnt know.
It's not actually true. It's possible to take a Linux driver as the
starting point for creating an iPXE driver, but it's not just a case of
copying and pasting.
Imho ipxe should show the card (incl. BusID) in the config command. But
this I can try: Implementing the BusID into the ipxe-Source. Mayby this
helps. And normally every nic should work with undionly, shouldnt it?
undionly.kpxe uses an UNDI driver provided by the NIC's own PXE
firmware. In your case, it sounds as though there is no existing PXE
firmware, so that won't work.
What are the PCI vendor:device IDs for this NIC?
Michael
_______________________________________________
ipxe-devel mailing list
ipxe-devel@lists.ipxe.org
https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
