Hi, iPXE developer, We are trying to build up a test PXE server with your binaries to validate our systems’ IRQ setting.
I have some questions of output files of iPXE source code. According to this table, there are lots of extensions can be chosen to be built. extension Valid platforms Description .pxe pcbios Headerless X86 assembly code, PXE- or NBP-booted, sometimes renamed to .0 to work on older DHCP/TFTP servers .efi efi EFI executable .kpxe pcbios Same as .pxe but will Keep the original UNDI stack/driver present. This is needed for undionlyref<http://forum.ipxe.org/showthread.php?tid=8127&pid=12812#pid12812> .kkpxe pcbios Same as .kpxe but will not unload (Keep) the PXE base code. only use with buggy BIOSes .lkrn pcbios Builds with kernel header similar to Linux so it can be started by many bootloaders .iso pcbios Builds .lkrn and adds ISOLINUX to create CD-ROM image, can be started by many bootloaders .hd pcbios Direct executable i386 code put on a harddisk image (32KB blocks) .dsk pcbios Direct executable i386 code put on a floppy disk image (512 Byte blocks) .pdsk pcbios Padded .dsk to work with loaders that requires exact size such as iLO .usb pcbios, efi Same as .dsk for pcbios, in efi mode it's an 1440K image with partition and [driver].efi added as /efi/boot/boot[arch].efi, mostly used for making USB stick images .rom pcbios File intended to be flashed into PCI-based NIC ROM .mrom pcbios File intended to be flashed into PCI-based NIC ROM. See notes for ''.mrom''<http://ipxe.org/download#large_rom_images> .pcirom pcbios Same as .rom .isarom pcbios File intended to be flashed into ISA-based NIC ROM, must be used with e.g. VirtualBox .efidrv efi Driver for NIC which can be used by other EFI firmware .efirom efi File intended to be flashed into NIC ROM for EFI .linux linux Linux ELF executable, use for tests and tap drivers If we want to build a binary has the same function of Undionly.kpxe but supports UEFI network IPV4/IPV6, which extension should we choose? _______________________________________________________________________ Regards, George Chang S/W R&D Department Wistron Corporation TEL：886-2-6612-5952 E-Mail：george_ch...@wistron.com<mailto:george_ch...@wistron.com> --------------------------------------------------------------------------------------------------------------------------------------------------------------- This email contains confidential or legally privileged information and is for the sole use of its intended recipient. Any unauthorized review, use, copying or distribution of this email or the content of this email is strictly prohibited. If you are not the intended recipient, you may reply to the sender and should delete this e-mail immediately. ---------------------------------------------------------------------------------------------------------------------------------------------------------------
_______________________________________________ ipxe-devel mailing list ipxe-devel@lists.ipxe.org https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
