Hi Christian, thanks for your time. below my answers: Wat is the pciid of the card? Me:... Vendor ID: 0x14e4 Device ID: 0x1639 Sub-System Vendor ID: 0x103c Sub System ID: 0x7055
Which iPXE binary are you using? (examples: ipxe.pxe, ipxe.lkrn, undionly.kpxe, ipxe.efi, snponly.efi) Me:...Tried to boot from the standard ISO, the so called "Bootable ISO image, joust to see if that ISO is able to map hardware and to start the iPXE console. How is that binary started? (chainloading over network) Me:...ISO image mounted into the iLO and system started from CD. What is the error message or what is it that isn't working for you? Me:...after start booting from iPXE ISO, the screen shows "FATAL HUB LINK ERROR" and stops going ahead. Output of ifstat inside of iPXE shell? Me:...after start booting from iPXE ISO, the screen shows "FATAL HUB LINK ERROR" and stops going ahead. Hoping to be clear and to have correctly answered to your questions. I'm looking forward your upgrades. BR, Michele Il giorno sab 12 gen 2019 alle ore 00:07 Christian Nilsson <nik...@gmail.com> ha scritto: > On Sat, 12 Jan 2019 at 00:04, michele pedrini <michelemikym...@gmail.com> > wrote: > > > > Dear All, > > I have 10 units of DL-385 G6 hp Proliant servers. > > This servers have a diskless configuration so I need to boot from a > remote repository. > > I wasted a lot of time trying to set iSCSI Boot using the on-board nic > HPE QLogic NC382i quadport, without no result. > > > > So I tried to use iPXE Boot in order to work around the initial issue. > > I already used iPXE boot in the recent past and I found out it worked > fine. > > But I can't make it run with that hp ethernet board. > > did you find in the past a solution to this issue? Any idea about how to > solve this issue? > > > > Thank you in advance for you time and help. > > Michele > > > > Wat is the pciid of the card? > Which iPXE binary are you using? (examples: ipxe.pxe, ipxe.lkrn, > undionly.kpxe, ipxe.efi, snponly.efi) > How is that binary started? (chainloading over network) > What is the error message or what is it that isn't working for you? > Output of ifstat inside of iPXE shell? > > /Christian >
_______________________________________________ ipxe-devel mailing list ipxe-devel@lists.ipxe.org https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
