> On Thu, Apr 29, 2021 at 01:27:11PM +0800, will.yy....@foxconn.com wrote: > > > Hi iPXE developers, > > Our new project met one issue that the SUT can't get IP address under UEFI > shell boot by snponly.efi > > At old project, the SUT can get IP address by below step; > 1. PXE Boot by snponly.efi > 2. snponly.efi load UEFI shell(bootx64.efi) > 3. unload snponly.efi under UEFI shell > 4. run "connect -r" and "ifconfig -s eth0 dhcp" to get IP address > > Our NPI project open DMAr function, the SUT can't boot by old > snponly.efi( build version: 30f9 ), we get > lastest ipxe source code and make snponly.efi(build version: g3ae83), > Repeat the above steps, the SUT can't get IP address. > The old project also can't get IP address boot by new snponly.efi. > > Appreciate your help.
My help was removing HTML noise. Visit https://lists.ipxe.org/pipermail/ipxe-devel/2021-April/007422.html and compare with https://lists.ipxe.org/pipermail/ipxe-devel/2021-April/007423.html for a better picture. In other words: Have a decent e-mail client. Groeten Geert Stappers -- Silence is hard to parse _______________________________________________ ipxe-devel mailing list ipxe-devel@lists.ipxe.org https://lists.ipxe.org/mailman/listinfo/ipxe-devel
