so which fileame or url is being used if both answers? the one which answers first (which would be unpredictable order)
> On 3 Apr 2023, at 11:48, Michael Brown via ipxe-devel > <ipxe-devel@lists.ipxe.org> wrote: > > On 03/04/2023 08:39, Ramesh Soni -X (ramsoni - Altran ACT S.A.S at Cisco) via > ipxe-devel wrote: >> We have both DHCPv4 and DHCPv6 running on same iPXE server. Our box is >> running iPXE code for downloading the image from ipv6, we have made entry in >> ipxe server dhcpd6.conf file for this box. >> First our box tries DHCPv4 thorugh which it gets the default ipv4 ip address >> although it didn’t have default file name so it tries to check with DHCPv6. >> Even though ipv6 assignment was done but image downloading was getting >> failed. >> Can you please suggest what will be the right behaviour on this? Is it fine >> to run both DHCPv4 and DHCPv6 on same iPXE server? > > Yes, you can run both DHCPv4 and DHCPv6 on the same network. iPXE will, by > default, try both IPv4 and IPv6 simultaneously. It will use the IPv4 > configuration from DHCPv4, and the IPv6 configuration from router > solicitation and/or DHCPv6. Either DHCPv4 or DHCPv6 may provide a boot > filename or URL. > > Michael > > _______________________________________________ > ipxe-devel mailing list > ipxe-devel@lists.ipxe.org > https://lists.ipxe.org/mailman/listinfo/ipxe-devel _______________________________________________ ipxe-devel mailing list ipxe-devel@lists.ipxe.org https://lists.ipxe.org/mailman/listinfo/ipxe-devel
