Jim,

Yes, this look fine.  As you suspected, I subtracted instead of added.  It 
was a late night Friday night due to problems at the radio station.  When I 
got up at 12:30PM to check on the tone, I was still have asleep.  Hence, my 
math faux pas.  Thanks for thinking ahead and catching it.

As has been noted by others, the tone is now gone from 1020 (12/4 0930EST). 
I haven't heard anything yet on 590, but I am keeping my ears open.  I 
understand that is supposed to begin again tomorrow.

73.
Rene'

Rene F. Tetro
Chief Engineer
Salem Communications - Philadelphia
WNTP-AM / WFIL-AM
117 Ridge Pike
Lafayette Hill, PA  19444
Phone:  610- 828-6965  Extension 41
Fax:  610-828-6725
Email:  [EMAIL PROTECTED]

"Blessed are the peacemakers....." (Mat. 5)
----- Original Message ----- 
From: "Jim Tonne" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>; "AMDX WTFDA List" <[EMAIL PROTECTED]>; "DX Hub List" 
<[EMAIL PROTECTED]>; "International Radio Club of America" 
<[email protected]>; "MWC List" <[EMAIL PROTECTED]>
Sent: Saturday, December 02, 2006 2:02 PM
Subject: Re: [IRCA] [NRC-AM] 1020 kHz tone continues


>
> Rene:
>
> You gave the apparent azimuth as 107 which goes out into the
> Atlantic . . .
>
> And you said it was 25 degrees south of (meaning, I suspect,
> clockwise from) WIBG.   Since WIBG is 154 degrees from you,
> I added 25 onto that number to get 179.  So I then used 179 for
> the azimuth.    [ Bet you meant 177, not 107 ]
>
> Does this:
> http://tonnesoftware.com/1020c.gif
> look right to you?   Note the use of 1020"C" for the name.
> If it looks OK to you I'll delete the C and we'll have the latest
> and greatest.
>
> - JimT

_______________________________________________
IRCA mailing list
[email protected]
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original 
contributors and do not necessarily reflect the opinion of the IRCA, its 
editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: [email protected]

Reply via email to