Brett Saylor wrote: > I didn't see the QRSS during the times I checked; the code showed up > +/-1 kHz from the carrier on a spectral display,
I only listened for the first hour of the test, and did not see any QRSS tones at all. The sawtooth, sweeps, dual-tone pulses, and conventional CW were easily audible. All of the sweep tones cut through the on-channel slop and displayed remarkably well on Spectran, as did the dual-tone pulses. For sweep tones and other type audio tones, it looks like Spectran will be a helpful tool, even without QRSS. At no time during the time period I was listening did I hear any of the expected QRSS tones on either sideband. Based on the strength of the conventional CW tones, I should have seen these easily at the stated +/- 2.5 KHz offset from the main carrier. Maybe these were transmitted later on? Rick Kunath Almont, MI _______________________________________________ IRCA mailing list [email protected] http://montreal.kotalampi.com/mailman/listinfo/irca Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers For more information: http://www.ircaonline.org To Post a message: [email protected]
