Hi Rob: Thanks for your note. You're right - it's the same principle as RF phasing, only at the AF stage. I have a Quantum Phaser and numerous loops and wires, which often work in various combinations at the RF stage, but in many situations, especially with strong locals that are tough to phase, this works even better. Right now I am getting somewhat decent audio from a high school basketball game (probably Utah or Wyoming) underneath local 1210-KWMG, something I haven't been able to replicate with RF phasing.
Tonight I've noticed that, once a null is established, one or both of the units can be rotated through pretty much 360 degrees to better locate the DX target station and/or get rid of the low hum that sometimes come with phasing of the pest, usually without having to tweak the volume controls. Kevin S Bainbridge Island, WA > Satya, > > It sounds like what you are doing is the same thing as is done with the phasers available from Quantum, MFJ or other places, except that you require two radios to get the effect because you do it at the audio level, > where the phasers out there generally do it at the antenna level and don't > require two radios. Admittedly, the radios are inexpensive but have you tried a phaser and is your effect any different or more pronounced? > > Rob _______________________________________________ IRCA mailing list [email protected] http://montreal.kotalampi.com/mailman/listinfo/irca Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers For more information: http://www.ircaonline.org To Post a message: [email protected]
