Just a theoretical one at this point. Mine would probably be a 10' X 25' or an 8' X 20.'
73, Dave -----Original Message----- From: Bill Nollman [mailto:[email protected]] Sent: Tuesday, December 29, 2009 1:57 PM To: HASCALL, DAVID CIV DFAS; [email protected]; [email protected] Subject: RE: [Amdx] Would this pre-amp boost signals sufficiently for a Flag ora Loop? Dave, how big of a flag/loop ? I have a 45'x75' loop that I have to attenuate it has so much gain ! I also have a 23'x30' loop that is just about right. Bill -----Original Message----- From: HASCALL, DAVID CIV DFAS [mailto:[email protected]] Sent: Tuesday, December 29, 2009 1:28 PM To: [email protected]; [email protected]; [email protected] Subject: [Amdx] Would this pre-amp boost signals sufficiently for a Flag ora Loop? I had a Sanserino loop that had a small pre-amp that used a single 9v battery. In checking out Ramsey Electronics' catalog, I see an RF Preamp. Would this model be sufficient to amplify signals from a Ewe or Flag antenna or a loop as the small amp did on my Sanserino? http://www.ramseyelectronics.com/cgi-bin/commerce.exe?preadd=action&key= SA7 I see that its coverage is broadband - 100 KHz to 1000 MHz. Thanks. 73, Dave in Indy _______________________________________________ This is Amdx - The WTFDA AM DX List. Amdx mailing list Post to: [email protected] Your Info Page: http://lists.wtfda.info/listinfo.cgi/amdx-wtfda.info Visit the WTFDA Forum at http://www.wtfda.info to view or upload your audio files! Register first. _______________________________________________ IRCA mailing list [email protected] http://montreal.kotalampi.com/mailman/listinfo/irca Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers For more information: http://www.ircaonline.org To Post a message: [email protected]
