Was I ever surprised today to see the late John Bryant's portable JRC NRD-535D rackmount case setup for auction on Ebay. This project of interconnected NRD-535D, twin Timewave DSP-9+ units, S-meter, and audio switching network inside of a portable rackmount case was John's primary DXpedition receiver before he got hooked on the Winradio SDR receivers. I spent many hours on Grayland DXpeditions with John, sitting across from him and this fine receiver and accessory setup:
http://cgi.ebay.com/JRC-NRD-535-D-Receiver-Timewave-DSP9-anvil-case-/270677363746 The Austin, Texas seller says he purchased the equipment at a radio auction, but has decided not to keep it. I contacted the seller to let him know about John Bryant and the background of this one-of-a-kind setup. The receiver has a couple of Kiwa filter modules inside, and I am almost certain it has *all *other Kiwa modifications for the NRD-535D, too. I remember that John had spoken of sending it to Craig at Kiwa Electronics for "full house" mods. The white/translucent rectangles that can be seen stuck on the receiver's main tuning knob are chunks of heavy duty, sticky-backed snap fastener material. I'm sure these can be peeled off and the remaining "goo" cleaned off satisfactorily. John used the fastener material to hold his "spin wheel" attachment for easier tuning. I don't believe this flat plate with finger hole (which extended beyond the tuning knob) is included with the auction. Guy Atkins Puyallup, WA _______________________________________________ IRCA mailing list [email protected] http://montreal.kotalampi.com/mailman/listinfo/irca Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers For more information: http://www.ircaonline.org To Post a message: [email protected]
