The carrier is back. It just locked again at 12:18 AM but no audio. The HD logo 
is popping on and off, so it is not strong enough to produce audio. HD Radio is 
like HD TV, either you get it or you do not. I guess if the stations end up 
going to digital, then they will mostly cover their metro area.  I am trying to 
get some audio, if possible, but it is tough. Don't know what pattern KRKO is 
using.

Patrick

Patrick Martin
Seaside OR
KGED QSL Manager

> Date: Fri, 3 Oct 2014 23:21:55 -0700
> From: [email protected]
> To: [email protected]
> Subject: [IRCA] KRKO in digital mode
> 
> KRKO-1380 is running its digital test broadcast.  I don't know when it 
> started but I first noticed it a few minutes before 11 pm Pacific time.
> 
> The signal occupies exactly +/- 10 kHz bandwidth.  The +/- 5kHz portion 
> is about 15 dB stronger than the part that's 5-10kHz above and below 1380..
> 
> 1370 is free of interference on the lower sideband, as is 1390 on the 
> upper sideband.
> 
> I don't have a compatible receiver, so I can't comment on how it sounds..
> 
> Bruce in Seattle
> about 25 miles south of the KRKO transmitter
> 
> _______________________________________________
> IRCA mailing list
> [email protected]
> http://montreal.kotalampi.com/mailman/listinfo/irca
> 
> Opinions expressed in messages on this mailing list are those of the original 
> contributors and do not necessarily reflect the opinion of the IRCA, its 
> editors, publishing staff, or officers
> 
> For more information: http://www.ircaonline.org
> 
> To Post a message: [email protected]
> 
                                          
_______________________________________________
IRCA mailing list
[email protected]
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original 
contributors and do not necessarily reflect the opinion of the IRCA, its 
editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: [email protected]

Reply via email to