Precisely! When the termination is the same value as the opposite end (the
radio feed) you will find your deepest null; best directionality.
A good place to start if you don't want to screw around all day is to use an
800 to 900 ohm resistor as the null.
BUT since I'm not a SuperLoop user these resistance values may not be the
best; if so, someone else will chime in.
Regards,
Mark Durenberger
-----Original Message-----
From: Donald Barnes via IRCA
Sent: Wednesday, September 07, 2016 8:40 AM
To: Mailing list for the International Radio Club of America
Cc: Donald Barnes
Subject: Re: [IRCA] Reversible Super Loop
_______________________________________________
IRCA mailing list
[email protected]
http://montreal.kotalampi.com/mailman/listinfo/irca
Be sure to register now for the Joint DX Convention
Kansas City, September 9 to 11. Hotel space is filling up.
Registration info:
http://www.nrcdxas.org
Opinions expressed in messages on this mailing list are those of the
original contributors and do not necessarily reflect the opinion of the
IRCA, its editors, publishing staff, or officers
For more information: http://www.ircaonline.org
To Post a message: [email protected]
_______________________________________________
IRCA mailing list
[email protected]
http://montreal.kotalampi.com/mailman/listinfo/irca
Be sure to register now for the Joint DX Convention
Kansas City, September 9 to 11. Hotel space is filling up.
Registration info:
http://www.nrcdxas.org
Opinions expressed in messages on this mailing list are those of the original
contributors and do not necessarily reflect the opinion of the IRCA, its
editors, publishing staff, or officers
For more information: http://www.ircaonline.org
To Post a message: [email protected]
