175' is a bit close for a side by side (Broadside) array, but a bit far for
an end to end (Endfire array) for BCB, but certainly this should still
provide pattern improvements.  73 KAZ

On Mon, Jul 9, 2018 at 1:49 PM, Brandon Jordan <[email protected]> wrote:

> I walked the spacing off today, it looks like roughly 175’ from SAL to SAL
> center.
>
> One of these will be a SAL-35, the second a SAL-30. I have more spacing
> options for a SAL-20 as the second SAL, up to a 400’.
>
> > On Jul 7, 2018, at 9:30 PM, Neil Kazaross <[email protected]> wrote:
> >
> > By all means phase two SAL's or similar if you have room. How far apart
> can
> > you place them?  73 KAZ
> >
> >> On Sat, Jul 7, 2018 at 6:22 PM, Brandon Jordan <[email protected]>
> wrote:
> >>
> >> Hi Colin. I missed this post somehow but, since seeing it, thought I
> >> should respond. I own both the NCC-1 and NCC-2. I actually thought I
> sold
> >> the NCC-1 last year on eBay but obviously did not as I just found it
> boxed
> >> up in my radio room closet.
> >>
> >> I have way more experience with the NCC-1, mainly phasing dual DXE
> active
> >> whips. I bought the NCC-2 from a ham who couldn’t figure out how to use
> it,
> >> but unfortunately since I put it online after a few months of being
> boxed,
> >> I don’t have any output out of antenna 2 so it is going to DXE for
> repair.
> >> Long story short, no experience with the NCC-2 besides a few days of
> >> testing when it first arrived. The NCC-1 worked great on two DXE active
> >> whips spaced 100’ apart.
> >>
> >> I have been so enamored with the Shared Apex Loop that regular phasers
> >> have been a bit on the back-burner and why I am now very interested in
> your
> >> new model. In speaking with the SAL guru Mark Bauman about dimensions
> on a
> >> SAL-35, he mentioned phasing two SAL’s could be very interesting and
> since
> >> I happen to have two SAL units I am planning on experimenting with
> that. I
> >> have the post holes dug, the 35’ masts aluminum masts built and etc
> ready
> >> to go but don’t see me getting those up until it cools off some here in
> TN.
> >>
> >> 73,
> >> Brandon
> >>
> >>>
> >
> _______________________________________________
> IRCA mailing list
> [email protected]
> http://montreal.kotalampi.com/mailman/listinfo/irca
>
> Opinions expressed in messages on this mailing list are those of the
> original contributors and do not necessarily reflect the opinion of the
> IRCA, its editors, publishing staff, or officers
>
> For more information: http://www.ircaonline.org
>
> To Post a message: [email protected]
>
>
_______________________________________________
IRCA mailing list
[email protected]
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original 
contributors and do not necessarily reflect the opinion of the IRCA, its 
editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: [email protected]

Reply via email to