According to ISS Technical Support, HP OpenView is still not compatible
unless the fix has been released recently for Real Secure 3.2

/m




John Rezabek <[EMAIL PROTECTED]>
Sent by: [EMAIL PROTECTED]
01/13/00 06:57 AM


        To:     "Administrator, Exchange" <[EMAIL PROTECTED]>, "'Lodin,
Steven {IT
4~Indianapolis}'" <[EMAIL PROTECTED]>, "'[EMAIL PROTECTED]'"
<[EMAIL PROTECTED]>
        cc:
        Subject:        RE: ISS RealSecure and SNMP


Steve,
The ISS RealSecure MIB has the info you requested. It gets installed with
the Sensor installations, I have attached it for your convenience. Let me
know if you have any other questions concerning it,
Thanks
John

At 11:04 AM 1/10/00 -0500, Administrator, Exchange wrote:
>TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message
to
>[EMAIL PROTECTED]  Contact [EMAIL PROTECTED] for help with any
problems!
>
----------------------------------------------------------------------------

>
>
>
> > -----Original Message-----
> > From: Lodin, Steven {IT 4~Indianapolis} [SMTP:[EMAIL PROTECTED]]
> > Sent: Thursday, December 16, 1999 10:29 AM
> > To:   '[EMAIL PROTECTED]'
> > Subject:      ISS RealSecure and SNMP
> >
> > Good day!
> >
> > Environment: ISS RealSecure 3.2 - Network Engine in Stealth mode on
NT,
> Consoles on NT
> >
> > Situation: I'm trying to simulate thresholding capability in
RealSecure
> (RS) by creating a user-defined event and sending an SNMP
> > trap for every occurance to my Tivoli TEC.  Tivoli will then be able
to
> apply the rule that if X events occur in Y time, then do
> > action Z (something I see lacking in RS).
> >
> > My Tivoli people are asking me for information about the SNMP trap I
am
> sending them.  They want to know specific SNMP information
> > such as the SNMP version, OID, the enterprise string, and MIB
> information.  I couldn't find any information on SNMP other than
> > destination address and community string in the manuals and online
help.
> >
> > Does anyone know this information or where I can find it?  I don't
> think sniffing a packet will help since it is ASN.1 encoded,
> > right?
> >
> > Thanks for the help!
> >
> > Steve
> > --
> > Steve Lodin <[EMAIL PROTECTED]>
> > Manager - IT Security
> > Roche Diagnostics Corp
> > 317-845-2070
> >

-- ISS-MIB { iso org(3) dod(6) internet(1) private(4) enterprises(1) 2499
}
-- Title:   Internet Security Systems Private Enterprise MIB
-- Version: 1.0

ISS-MIB DEFINITIONS ::= BEGIN

IMPORTS
    enterprises    FROM RFC1155-SMI
    DisplayString  FROM SNMPv2-TC
    TRAP-TYPE      FROM RFC-1215;

-- *******************************************************************
-- High-level identifiers
-- *******************************************************************

iss                  OBJECT IDENTIFIER ::= { enterprises 2499 }

products OBJECT IDENTIFIER ::= { iss 1 }

realSecure              OBJECT IDENTIFIER ::= { products 1 }
internetScanner         OBJECT IDENTIFIER ::= { products 2 }
systemSecurityScanner   OBJECT IDENTIFIER ::= { products 3 }
common                  OBJECT IDENTIFIER ::= { products 4 }

logdata                 OBJECT IDENTIFIER ::= { common 1 }

v1-5                    OBJECT IDENTIFIER ::= { realSecure 1 }
engine                  OBJECT IDENTIFIER ::= { v1-5 1 }
console                 OBJECT IDENTIFIER ::= { v1-5 2 }
daemon                  OBJECT IDENTIFIER ::= { v1-5 3 }
events                  OBJECT IDENTIFIER ::= { engine 1 }

v2-5                    OBJECT IDENTIFIER ::= { realSecure 2 }
engine2-5               OBJECT IDENTIFIER ::= { v2-5 1 }
events2-5                       OBJECT IDENTIFIER ::= { engine2-5 1 }


-- *******************************************************************
-- 1-5 EventData
-- *******************************************************************

eventTable OBJECT-TYPE
        SYNTAX SEQUENCE OF EventEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION ""
    ::= { events 1 }

eventEntry OBJECT-TYPE
        SYNTAX EventEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION ""
    INDEX { eventEntryName }
    ::= { eventTable 1 }

EventEntry ::= SEQUENCE
{
        eventEntryName DisplayString,
        eventEntryTime DisplayString,
        eventEntryAmask INTEGER,
        eventEntryPriority INTEGER,
        eventEntryProtocol INTEGER,
        eventEntrySourceIpAddress DisplayString,
        eventEntryDestinationIpAddress DisplayString,
        eventEntrySourceName DisplayString,
        eventEntryDestinationName DisplayString,
        eventEntryIcmpType DisplayString,
        eventEntryIcmpCode DisplayString,
        eventEntrySourcePort INTEGER,
        eventEntryDestinationPort INTEGER,
        eventEntrySourcePortName DisplayString,
        eventEntryDestinationPortName DisplayString,
        eventEntryUserActionList DisplayString
}

eventEntryName OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION "The name of the decode/event for this trap."
    ::= { eventEntry 1 }

eventEntryTime OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION "The time the event was discovered relative to the
RealSecure engine."
    ::= { eventEntry 2 }

eventEntryAmask OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION "A Mask to indicate what actions are configured for this
event:
        ACT_IGN (Ignore)                                        =
0x00000000,
        ACT_KILL (Kill Session)                                 =
0x00000001,
        ACT_VIEW_SESS (Send Stream to Console for View Session) =
0x00000002,
        ACT_EMAIL (Send an e-mail message)                      =
0x00000004,
        ACT_LOG_RAW (Record stream data for viewing)            =
0x00000008,
        ACT_DISPLAY (Send event to console)                     =
0x00000040,
        ACT_LOG_DB (Record to database)                         =
0x00000200,
        ACT_FIREWALL (Send message to lock firewall)            =
0x00000400,
        ACT_SNMP_TRAP (Send SNMP Trap)                          =
0x00000800,
        ACT_USER_SPECIFIED1 (User Specified 1)                  =
0x00001000,
        ACT_USER_SPECIFIED2 (User Specified 2)                  =
0x00002000,
        ACT_USER_SPECIFIED3 (User Specified 3)                  =
0x00004000,
        ACT_USER_SPECIFIED4 (User Specified 4)                  =
0x00008000 "

    ::= { eventEntry 3 }

eventEntryPriority OBJECT-TYPE
    SYNTAX INTEGER { other(1), low(2), medium(3), high(4) }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION "The priority of the decode as determined from the current
engine policy."
    ::= { eventEntry 4 }

eventEntryProtocol OBJECT-TYPE
    SYNTAX INTEGER { other(1), tcp(2), udp(3), icmp(4)  }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION "Protocol type for this event."
    ::= { eventEntry 5 }

eventEntrySourceIpAddress OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION "Source Ip Address"
    ::= { eventEntry 6 }

eventEntryDestinationIpAddress OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION "Destination Ip Address"
    ::= { eventEntry 7 }

eventEntrySourceName OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION "Source Ip Address (engine no longer does dns lookup)"
    ::= { eventEntry 8 }

eventEntryDestinationName OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION "Destination Ip Address (engine no longer does dns
lookup)"
    ::= { eventEntry 9 }

eventEntryIcmpType OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION "ICMP Type"
    ::= { eventEntry 10 }

eventEntryIcmpCode OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION "ICMP Code"
    ::= { eventEntry 11 }

eventEntrySourcePort OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION "Source Port"
    ::= { eventEntry 12 }

eventEntryDestinationPort OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION "Destination Port"
    ::= { eventEntry 13 }

eventEntrySourcePortName OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION "The name of the network service usually associated with
the source port."
    ::= { eventEntry 14 }

eventEntryDestinationPortName OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION "The name of the network service usually associated with
the dest port."
    ::= { eventEntry 15 }

eventEntryUserActionList OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION "This field is obsolete.
                 This same information can be found in the AMask field."
    ::= { eventEntry 16 }

-- *******************************************************************
-- Log Data
-- *******************************************************************

logTable OBJECT-TYPE
        SYNTAX SEQUENCE OF LogEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION ""
    ::= { logdata 1 }

logEntry OBJECT-TYPE
        SYNTAX LogEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION ""
    INDEX { logEntryTime }
    ::= { logTable 1 }

LogEntry ::= SEQUENCE
{
        logEntryTime TimeTicks,
        logEntrySource DisplayString,
        logEntryCategory DisplayString,
        logEntryEventId INTEGER,
        logEntryDescription DisplayString,
        logEntryData OCTET STRING
}


logEntryTime OBJECT-TYPE
    SYNTAX TimeTicks
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION "The TimeTicks when the log entry was written."
    ::= { logEntry 1 }

logEntrySource OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION "The Application that sent the message"
    ::= { logEntry 2 }

logEntryCategory OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION ""
    ::= { logEntry 3 }

logEntryEventId OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION ""
    ::= { logEntry 4 }

logEntryDescription OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION ""
    ::= { logEntry 5 }

logEntryData OBJECT-TYPE
    SYNTAX OCTET STRING
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION ""
    ::= { logEntry 6 }

-- *******************************************************************
-- 2-5 EventData
-- *******************************************************************

event25Table OBJECT-TYPE
        SYNTAX SEQUENCE OF Event25Entry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION ""
    ::= { events2-5 1 }

event25Entry OBJECT-TYPE
        SYNTAX Event25Entry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION ""
    INDEX { eventEntryName25 }
    ::= { event25Table 1 }

Event25Entry ::= SEQUENCE
{
        eventEntryName25 DisplayString,
        eventEntryTime25 DisplayString,
        eventEntryProtocol25 DisplayString,
        eventEntrySourceIpAddress25 DisplayString,
        eventEntryDestinationIpAddress25 DisplayString,
        eventEntryIcmpType25 DisplayString,
        eventEntryIcmpCode25 DisplayString,
        eventEntrySourcePort25 DisplayString,
        eventEntryDestinationPort25 DisplayString,
        eventEntryUserActionList25 DisplayString,
        eventEntryEventSpecificInfo25 DisplayString
}

eventEntryName25 OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION "The name of the decode/event for this trap."
    ::= { event25Entry 1 }

eventEntryTime25 OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION "The time the event was discovered relative to the
RealSecure engine."
    ::= { event25Entry 2 }

eventEntryProtocol25 OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION "Protocol type for this event."
    ::= { event25Entry 3 }

eventEntrySourceIpAddress25 OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION "Source Ip Address"
    ::= { event25Entry 4 }

eventEntryDestinationIpAddress25 OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION "Destination Ip Address"
    ::= { event25Entry 5 }

eventEntryIcmpType25 OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION "ICMP Type"
    ::= { event25Entry 6 }

eventEntryIcmpCode25 OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION "ICMP Code"
    ::= { event25Entry 7 }

eventEntrySourcePort25 OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION "Source Port"
    ::= { event25Entry 8 }

eventEntryDestinationPort25 OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION "Destination Port"
    ::= { event25Entry 9 }

eventEntryUserActionList25 OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION "A string which indicates what actions are configured for
this event.
        Currently available actions:
        KILL (Kill Session - ends a tcp-based session)
        VIEW_SESS (Send Stream to Console for View Session)
        EMAIL (Send an e-mail message to a configured email account)
        LOG_RAW (Record stream data for later analysis or viewing)
        DISPLAY (Send event to console)
        LOG_DB (Record the event to database)
        FIREWALL (Send message to lock firewall)
        SNMP_TRAP (Send SNMP Trap to configured SNMP manager)
        USER_SPECIFIED1 (User Specified 1 - launch a program as configured
per engine setup)
        USER_SPECIFIED2 (User Specified 2)
        USER_SPECIFIED3 (User Specified 3)
        USER_SPECIFIED4 (User Specified 4)"
    ::= { event25Entry 10 }

eventEntryEventSpecificInfo25 OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION "This variable contains a listing of other
variables:values
                 which are specific to the given event."
    ::= { event25Entry 11 }



-- *******************************************************************
-- TRAPS
-- *******************************************************************

eventinfo TRAP-TYPE
    ENTERPRISE iss
    VARIABLES
        {
                eventEntryName,
                eventEntryTime,
                eventEntryAmask,
                eventEntryPriority,
                eventEntryProtocol,
                eventEntrySourceIpAddress,
                eventEntryDestinationIpAddress,
                eventEntrySourceName,
                eventEntryDestinationName,
                eventEntryIcmpType,
                eventEntryIcmpCode,
                eventEntrySourcePort,
                eventEntryDestinationPort,
                eventEntrySourcePortName,
                eventEntryDestinationPortName,
                eventEntryUserActionList
        }
    DESCRIPTION
    "This trap is sent from a RealSecure engine whenever a event
         is encountered that the RealSecure engine is configured to send
traps
         for.  The details of the event are contained in the trap."
    ::= 1

-- *******************************************************************

logdatatrap TRAP-TYPE
    ENTERPRISE iss
    VARIABLES
        {
                logEntryTime,
                logEntrySource,
                logEntryCategory,
                logEntryEventId,
                logEntryDescription,
                logEntryData
        }
    DESCRIPTION
    "This trap is sent for certain types of log data.
     Only configured types of log data which will be sent as a trap."
    ::= 2

-- *******************************************************************

highpriorityevent TRAP-TYPE
    ENTERPRISE iss
    VARIABLES
        {
                eventEntryName25,
                eventEntryTime25,
                eventEntryProtocol25,
                eventEntrySourceIpAddress25,
                eventEntryDestinationIpAddress25,
                eventEntryIcmpType25,
                eventEntryIcmpCode25,
                eventEntrySourcePort25,
                eventEntryDestinationPort25,
                eventEntryUserActionList25,
                eventEntryEventSpecificInfo25
        }
    DESCRIPTION
    "This trap is sent from a RealSecure engine whenever a high priority
event
         is encountered that the RealSecure engine is configured to send
traps
         for.  The details of the event are contained in the trap."
    ::= 3

-- *******************************************************************

mediumpriorityevent TRAP-TYPE
    ENTERPRISE iss
    VARIABLES
        {
                eventEntryName25,
                eventEntryTime25,
                eventEntryProtocol25,
                eventEntrySourceIpAddress25,
                eventEntryDestinationIpAddress25,
                eventEntryIcmpType25,
                eventEntryIcmpCode25,
                eventEntrySourcePort25,
                eventEntryDestinationPort25,
                eventEntryUserActionList25,
                eventEntryEventSpecificInfo25
        }
    DESCRIPTION
    "This trap is sent from a RealSecure engine whenever a medium priority
event
         is encountered that the RealSecure engine is configured to send
traps
         for.  The details of the event are contained in the trap."
    ::= 4

-- *******************************************************************

lowpriorityevent TRAP-TYPE
    ENTERPRISE iss
    VARIABLES
        {
                eventEntryName25,
                eventEntryTime25,
                eventEntryProtocol25,
                eventEntrySourceIpAddress25,
                eventEntryDestinationIpAddress25,
                eventEntryIcmpType25,
                eventEntryIcmpCode25,
                eventEntrySourcePort25,
                eventEntryDestinationPort25,
                eventEntryUserActionList25,
                eventEntryEventSpecificInfo25
        }
    DESCRIPTION
    "This trap is sent from a RealSecure engine whenever a low priority
event
         is encountered that the RealSecure engine is configured to send
traps
         for.  The details of the event are contained in the trap."
    ::= 5

END


                "Adaptive Network Security for the Enterprise"

John M. Rezabek                                                 Phone:
727.517.1500
Technical Product Manager                       Fax: 727.517.9090
ISS Internet Security Systems, Inc.     Pager: 888.784.6185
NASDAQ (ISSX)                                           E-Mail:
[EMAIL PROTECTED]


(See attached file: iss.mib)

iss.mib

Reply via email to