TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to
[EMAIL PROTECTED] Contact [EMAIL PROTECTED] for help with any problems!
----------------------------------------------------------------------------
Morten,
I am working on a Doc with the procedures as we speak....Next week I am
training the CheckPoint folks on the CheckPoint for RealSecure. I will
release the Tech NOte to the forum once ready. I have everything in my lab
up and running with the CheckPoint Console, the CPRSM Module that resides
on the FW-1, and a standard Network Engine.
The licensing was very confusing.
You need a RealSecure for CheckPoint License from CheckPoint that is based
off the IP address of the Console. ISS RealSecure Keys will not work.
Also - You need to make sure you are using consistent Encryption levels and
providers. FOr my recent Testing I simply used all Microsoft Enhanced. You
also need to make sure you move the Console Keys to the Engine and CPRSM
Keys directory located on the FireWall-1 box. Finally if you want to use
ELA to send RS events to the FireWall-1 Logs you also need the CPRSM key
moved to the Engines.
This was very confusing, but after a few go arounds it now all makes since.
As soon as I am done with this doc I will share it after my Training at
CheckPoint, so they can also review it for accuracy.
Thanks
John
At 12:06 PM 2/2/00 +0100, Morten Augustesen wrote:
>TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to
>[EMAIL PROTECTED] Contact [EMAIL PROTECTED] for help with any problems!
>----------------------------------------------------------------------------
>
>
>I have a problem with Checkpoint RealSecure 3.2.
>I'm only using a Management Console and a Network Engine.
>
>I have received a certificate key from Checkpoint. With this key I have
>generated a license using the IP-address of the Network Engine.
>In the RealSecure Management Console I have entered this license - but when
>I try to establish a connection with the Network Engine, I'm prompted with
>a dialog box saying:
>"No valid Check Point RealSecure license is installed."
>(First I get the dialog saying that I'm using weak encryption, etc..... -
>so I have a TCP connection)
>
>The Network Engine is listening on port 2998 (I can telnet to this port
>from the Management Console).
>I have copied the public key from the Management Console to the Network
>Engine.
>
>I can see that the license for the Network Engine is accepted by the
>Management Console.
>
>I have even tried connecting the Network Engine and Management Console
>directly by a twisted pair cable - but this does not help.
>
>Has anybody been able to license Checkpoint RealSecure 3.2?????
>
>Regards,
>Morten Augustesen
>
>
"Adaptive Network Security for the Enterprise"
John M. Rezabek Phone: 727.517.1500
Technical Product Manager Fax: 727.517.9090
ISS Internet Security Systems, Inc. Pager: 888.784.6185
NASDAQ (ISSX) E-Mail: [EMAIL PROTECTED]
