TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to
[EMAIL PROTECTED]  Contact [EMAIL PROTECTED] for help with any problems!
----------------------------------------------------------------------------

Hi all,

   My company is recently using Realsecure 3.2 to monitor our internet
link and internal subnet. The currently configuration is one engine is
connected to internet link to monitor all in/out traffic, and another
engine is connected to one of our internal subnets. As per the Starting
Guide mentioned, one console can monitor one or more engines at the same
time. When I trying to do this by add a detector and click the OK
button, the console always prompt that "you have exceeded the device
limit" and reject the request. I have put two iss.key files in the same
directory but still failure to do so. Now, I need to use two consoles to
monitor two engines, separately. Could anyone advice me how to
configurate the console so it can monitor two engines ?

  Furthermore, I found the engine, which monitor the internet link, seem
to have problem. The preview report is alway showing source address
0.0.0.0 doing Syn_flood to various destinations. In the event inspector,
the info type is SPOOFEDSRC and Info Value is a IP address. I'm sure the
address 0.0.0.0 is not present, because I used the sniff to monitored
the internet link several days and none such address in the sniff logs.
Does someone could tell me what wrong in my engine setting or console
setting  ?


Best Regards,
weike Pong,
ITSC, 
HKUST

Reply via email to