TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to
[EMAIL PROTECTED] Contact [EMAIL PROTECTED] for help with any problems!
----------------------------------------------------------------------------
Find out how much memory is in the box and make sure you do not
reallocate over 500MB ( i.e. if you have a Gig preall will be 50%, but if
you have 2 gig then it is 25%) Symptoms: Error message - Detector
Error:Network
Engine running out of memory on Console and NT Event Log Effect: (Windows NT
Only) Network Engines running on systems with large amounts of RAM (500+ MB)
may encounter an Out of Memory condition at start up. Resolution: If you
encounter this problem, do the following:
1. Shutdown the engine.
2. Edit the current.policy in the directory where the engine was installed.
3. Search for the term PreAllocationPercent. Find a section that looks as
follows: []; PreAllocateMemory =B 1; PreAllocationPercent =L 80;
The number following PreAllocationPercent dictates how much available memory
will be pre- allocated for use by the engine Depending upon the amount of
memory installed in the machine, decide on an initial number less than 80.
You are advised to start from 40 on a 1 GB memory machine.
4. Replace the "PreAllocationPercent" number with this number.
5. Save the file and restart the engine.
Regards,
Jeferson Stabille
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
[EMAIL PROTECTED]
Sent: Friday, March 24, 2000 7:20 PM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: Re: Realsecure Error in NT 4.0 - Illegal System DLL relocation
- Ole32.dll-reply2
TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to
[EMAIL PROTECTED] Contact [EMAIL PROTECTED] for help with any
problems!
----------------------------------------------------------------------------
It appears that an old OLE32.dll Extension file is not interoperating well
with the ISS RealSecure 3.2 version..
If this is an engine, you can reblast it correct?? If you can, do the
following, do a dirty install of Windows NT 4.0, basically boot from a
CD-ROM, Hit repair, then hit format NTFS, install the full bloated NT 4.0,
then install Real Secure 3.2, after you have Real Secure 3.2, harden the
box.
It could be that the OLE32.dll driver is just finicky, and doesn't like
being touched.. To bad... 'touch' is not a bad thing..
/m
[EMAIL PROTECTED]
03/24/00 02:19 PM
To: [EMAIL PROTECTED]
cc:
Subject: Re: Realsecure Error in NT 4.0 - Illegal System DLL
relocation - Ole32.dll
-reply
Hi Mark.
Yes. Same error !!!
Regards,
Rubens.
[EMAIL PROTECTED]
03/24/2000 07:32 PM GMT
To: Rubens Caparica@Andersen Consulting
cc: [EMAIL PROTECTED], [EMAIL PROTECTED]
Subject: Re: Realsecure Error in NT 4.0 - Illegal System DLL relocation -
Ole32.dll -reply
Hmm, interesting, Have you tried Windows NT Workstation for the engine..??
/mark
[EMAIL PROTECTED]
Sent by: [EMAIL PROTECTED]
03/24/00 09:56 AM
To: [EMAIL PROTECTED]
cc: [EMAIL PROTECTED], [EMAIL PROTECTED]
Subject: Realsecure Error in NT 4.0 - Illegal System DLL
relocation - Ole32.dll
TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message
to
[EMAIL PROTECTED] Contact [EMAIL PROTECTED] for help with any
problems!
----------------------------------------------------------------------------
Dear All;
I have a problem installing Real Secure; and I hope you can help me to
over
come this problem.
The configuration that I am using s/w and h/w as follow:
HP LH SERVER 4, 1GB Ram, 200 Gb HD
WinNT4 server and SP5 as recommended
Real Secure 3.2.1 Network Engine
Internet Explorer 5
Management console is in other machine
Problem:
When I initiate the connection between the RealSecure Engine and the
Realsecure
Management Console, the follow error is shown in the RealSecure Engine
machine
NT error box:
The system dll OLE32.DLL was relocated in memory. The application will not
run
properly. Contact the vendor to get the new version of DLL.
Can anybody help me ?
Urgent help needed !!!!
Thanks !!!!!
