TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to
[EMAIL PROTECTED] Contact [EMAIL PROTECTED] for help with any problems!
----------------------------------------------------------------------------
Installing RealSecure System Engine on Unix
The Unix installation of RealSecure network engine has no graphical user
interface. It is performed from a Unix shell prompt.
To install RealSecure network engines for Unix, perform the following steps:
1. Log in using the superuser or root account.
2. Insert the CD into the CD-ROM drive.
3. Mount the CD-ROM.
4. Type the following command, and then press Enter:
pkgadd -d <full path to install image>
The full path to install image is the location of your program files:
either on the CD, on your local drive, or on a network drive.
5. Press Enter to select the installation of all packages in the
archive (the default).
6. Enter y to install with default parameters
7. Enter y to view the license agreement.
8. Enter y to accept the terms of the agreement.
9. Enter n to cancel installation and return to the Unix prompt.
10. Enter the path to the directory where you want to install RealSecure.
11. If you are installing for the first time, the install path defaults
to /opt/ISS.
12. Choose a cryptographic provider.
13. Enter n to select algorithms.
14. Make selections.
15. Enter y to run the install scripts.
16. Reboot the system after install scripts are complete.
Configuring stealth mode on UNIX
The system is configured so that the stealth interface is not enabled at
system boot. In the RealSecure startup script bring up the stealth
interface with the following command:
/usr/sbin/ifconfig hmeo plumb -arp
Running ifconfig -a shows the following for the device:
hmeo: flags=8c3<UP,BROADCAST,RUNNING,NOARP,MULTICAST> mtu 4352
inet 0.0.0.0 netmask 0
ether 8:0:20:f0:0:ba
At 11:50 AM 7/14/00 +1000, mclass wrote:
>TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to
>[EMAIL PROTECTED] Contact [EMAIL PROTECTED] for help with any problems!
>----------------------------------------------------------------------------
>
>Arie
>
>I'm sure you will receive a few answers to this -
>
>The correct command to plumb the interface in promiscous mode is:
>
>/usr/sbin/ifconfig hmex plumb -arp up
>
>replacing hmex with your interface name eg hme0.
>
>Then check the interface using ifcongig -a
>
>It should show up in the list and have an IP address of 0.0.0.0.
>
>Then follow the instructions as provided by the ISS tech support engineer in
>the engine properties.
>
>Hope this helps
>
>MARC CLASS
>
>
>
>
>
>
> >===== Original Message From "Arie Elkins" <[EMAIL PROTECTED]> =====
> >TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to
> >[EMAIL PROTECTED] Contact [EMAIL PROTECTED] for help with any
> problems!
> >----------------------------------------------------------------------------
> >
> >I'm having a problem setting up the RealSecure engine on Solaris. We've got
> >two nic cards in the machine, and we set up the first nic without an IP
> >address outside the firewall, but no matter what we do, it doesn't do
> >anything on that NIC card. It will only use the card we set inside the
> >firewall with an IP to pick up traffic. What could I be doing wrong?
>
>[EMAIL PROTECTED]
>
>
