To add to the Ghost off topic. It will output via IP address to many
machines at once across the LAN or wan. I would do one segment at a time.
John Knickerbocker
HelpDesk-Nutrilite
"Paul Osterwald"
<posterwald@intr To: [EMAIL PROTECTED]
usion.com> cc: LENA LI <[EMAIL PROTECTED]>,
[EMAIL PROTECTED]
Sent by: Subject: Re: Proactive Guidelines
owner-issforum@i
ss.net
10/09/00 09:47
AM
The point is valid. I would not try to harden 10K machines let alone 100
by
hand, however, if there is a mandate to fix this many systems one can build
a
hardened system use COTS tools to check the system vulnerabilities and then
build
an image file of the system partition and use this as a basis for a
reasonably
secure underlying OS that has been hardened. You can use this as the
blueprint
and use Ghost or another tool to roll out the underlying image file for the
boot
partition.
[EMAIL PROTECTED] wrote:
> TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message
to
> [EMAIL PROTECTED] Contact [EMAIL PROTECTED] for help with any
problems!
>
----------------------------------------------------------------------------
>
> Missing the point, most IT people don't want to cobble things together by
> hand anymore.. They want an automated to do their job for them. If one
> were to download the SANS NT Hardening Guide.. OK, that is fine and dandy
> for one or two machines that someone can do by hand, but try like
deploying
> 10,000 machines at once. The SANS guide was designed for scaleability.
>
> /mark
--
Paul Osterwald
Sr. Security Engineer
Intrusion.com
3940 Ruffin Road
San Diego, CA 92123
(858) 268-1236 x2232 (Office)
(619) 865-2775 (Cell)
(858) 268-7755 (Fax)
http://www.intrusion.com
mailto:[EMAIL PROTECTED]
(See attached file: posterwald.vcf)
posterwald.vcf