TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to
[EMAIL PROTECTED] Contact [EMAIL PROTECTED] for help with any problems!
----------------------------------------------------------------------------
Kevin:
While you can direct a request to support for a more definitive answer, the
short answer is NO, you cannot set RealSecure Network Sensor to use more
than ONE monitoring NIC. If you can't amalgamate the traffic from both
segments so they pass by the one NIC, then you have to use separate sensors
for each segment. And this should specifically apply to segments separated
by a firewall.
James R Lindley
Anomaly Detection Xpert
Global Surveillance and Reconnaisance Group
Managed Security Services Special Operations Group
Internet Security Systems, Inc.
Vox: 678-443-6323
Fax: 678-443-6476
An unquenchable thirst for Pierian waters.
Internet Security Systems -- The Power to Protect
Confidentiality Notice: This message is being sent by or on behalf of a
network security professional. It is intended exclusively for the individual
to whom it is addressed. This communication may contain information that is
proprietary, privileged or confidential. If you are not the named addressee
(to or cc), you are not authorized to read, print, retain, copy or
disseminate this message or any part of it. If you have received this
message in error, please notify the sender immediately by e-mail and delete
all copies of the message.
-----Original Message-----
From: Kumar, Ashish [mailto:[EMAIL PROTECTED]]
Sent: Sunday, December 03, 2000 11:01 PM
To: 'Kevin Pirkle'; [EMAIL PROTECTED]
Subject: RE: 2 Network Sensors on 1 Server
TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to
[EMAIL PROTECTED] Contact [EMAIL PROTECTED] for help with any
problems!
----------------------------------------------------------------------------
I think you can do so if the network traffic is not much since NE's are
memory intensive.
-----Original Message-----
From: Kevin Pirkle [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, November 28, 2000 3:05 AM
To: [EMAIL PROTECTED]
Subject: 2 Network Sensors on 1 Server
TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to
[EMAIL PROTECTED] Contact [EMAIL PROTECTED] for help with any
problems!
----------------------------------------------------------------------------
I am currently running RS 5.0 in stealth mode on a Dell 4400 and have a
license for 2 network sensors. The server is barely utilized. Is it
possible to setup 2 NIC's running in stealth mode (one inside my firewall
and the other outside) on the same box? Would it be as simple as setting up
another network sensor listening on another port?
Thanks!
Kevin Pirkle
