TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to
[EMAIL PROTECTED]  Contact [EMAIL PROTECTED] for help with any problems!
----------------------------------------------------------------------------

All,

I have several separate installations of Realsecure a different sites.  I
have OS Sensors v5, Server Sensors v5.1, and both NT4/W2K v5 and Nokia v4.6
Network Sensors.  I have Workgroup Manager 5 in one location and 5.5 in
others.  I have over 30 sensors on which the problem occurs.  I think I have
almost all possible configurations covered.

All exhibit the same problem at irregular intervals.

While monitoring sensors, I right click one and select "Maintain Logs."  In
the dialog box that opens, I select the checkbox for "Dynamic Upload" and
change the default percentage from 90% to 12% [upon a recomendation 10
months ago from ISS Support that setting below 10% would not function].  I
click OK to save the settings.  After this point I have restarted the senor,
rebooted the device, or left it alone.

At irregular intervals, I have reattached to some sensors and seen them
synchronize 5000 records.  I right click one and select "Maintain Logs" and
see that the "Dynamic" checkbox is UNCHECKED and the percentage is reset to
90% and grayed out.

I have reset the log settings to my standard on each device and found hours,
days, or weeks later that they have returned to factory default.

What, if anything, am I doing wrong?  How can I ensure that these settings
stay in place?

Is anyone else experiencing this problem?  Has anyone specifically looked
for this on their own sensors?

I have posted this question previously to the Forum and coppied Support.  I
have received a variety of answers ranging from "you musy apply the policy
after saving it" [does not apply as this is NOT a "policy" setting] to
"reinstall the RSWM" [has no effect] and "reboot" [a little vague].

Any help will be appreciated.

Thanks,
Mike Morabito


Reply via email to