TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to [EMAIL PROTECTED] Contact [EMAIL PROTECTED] for help with any problems! ----------------------------------------------------------------------------
Believe, the new server sensor ver. 6.01 or 6.1 should work as it no longer inserts shims into TCP/IP stack. Pl check with ISS. See below: In previous versions of Server Sensor, there were two modules that monitored network traffic to and from the server. These modules were inserted into the TCP/IP stack. The upper module monitored traffic above the TCP/IP stack, and the lower module monitored traffic below the TCP/IP stack. Monitoring traffic above the TCP/IP stack allowed Server Sensor to see the traffic before it can reach a running application program. Software that also inserts modules into the TCP/IP stack can conflict with Server Sensor. You no longer have the Deterministic Networks Enhancer (DNE) in version 6.01. In version 6.0.1 the DNE was replaced with Blackice technology. The conflicts that were common with DNE have practically been eliminated. Cheers!! -Ashish- -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Friday, November 30, 2001 3:32 AM To: Damian Carter Cc: '[EMAIL PROTECTED]'; [EMAIL PROTECTED] Subject: Re: Server Sensor and WLBS TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to [EMAIL PROTECTED] Contact [EMAIL PROTECTED] for help with any problems! ------------------------------------------------------------------------ ---- It won't work. In a nut shell it puts a wedge in the IP stack that cannot happen in a virtual environment. Hope that helps. Paul L. Damian Carter <DCarter@fami To: "'[EMAIL PROTECTED]'" <[EMAIL PROTECTED]> ly.co.uk> cc: Sent by: Subject: Server Sensor and WLBS owner-issforu [EMAIL PROTECTED] 11/29/01 06:00 AM TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to [EMAIL PROTECTED] Contact [EMAIL PROTECTED] for help with any problems! ------------------------------------------------------------------------ ---- Hi, Does anyone know a successful way to apply a Server Sensor to a NIC that is using Microsoft WLBS (Windows Load Balancing System). The WLBS creates a virtual NIC and TCP/IP for the physical NIC is disabled in the bindings as it uses the TCP/IP on the Virtual NIC. We are using Real Secure 5.5 on Windows NT. I have a fear that this is not possible but any ideas or advice at all will be appreciated. Cheers Damian Why not visit our website at http://www.family.co.uk This message is sent in confidence to the addressee only. The contents should not be disclosed to anyone other than the addressee. If you receive this message in error please advise the sender. Any opinions expressed are those of the author only and not necessarily the Society or Company. This e-mail does not constitute either offer or acceptance of any contractually binding agreement. Family Assurance Friendly Society Limited (incorporated under the Friendly Societies Act 1992 Reg.No.939F) and Family PEP Managers Limited(Co.No.2934967) are regulated by the Personal Investment Authority for investment business. Family Equity Plan Limited (Co.No.2208249) and Family Investment Management Limited (Co.No.1915516) are regulated by the Personal Investment Authority and IMRO for investment business. Family Enterprise Limited (Co.No.2489291) provides products which are not regulated by the Personal Investment Authority or IMRO. Registered in England at 16-17 West Street,Brighton BN1 2RL. This e-mail and any attachments are intended only for the individual or company to which it is addressed and may contain information which is privileged, confidential and prohibited from disclosure or unauthorized use under applicable law. If you are not the intended recipient of this e-mail, you are hereby notified that any use, dissemination, or copying of this e-mail or the information contained in this e-mail is strictly prohibited by the sender. If you have received this transmission in error, please return the material received to the sender and delete all copies from your system.
