TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to [EMAIL PROTECTED] Contact [EMAIL PROTECTED] for help with any problems! ----------------------------------------------------------------------------
It seems to work more consistently when you do it from the Deployment Wizard. However, on several occasions I've seen the same error as Mechfox, on sensors which I have already added to my Event Collector! It appears you have to re-add sensors periodically; it's as if the Event Collector doesn't recognize the sensor, even though if you check its properties, the sensor exists in the list (of course because I've already added it and re-added it at least 5 times). It only happens when I shutdown the Workgroup Manager, reboot the box and bring it back up. I've tried both ways, Deployment Wizard and adding the sensors manually from the Event Collector Properties window, no difference. I can almost guarantee I'll see the same error next time I have to restart my Workgroup Manager. Anyone else seeing this and/or have any solutions? Thanks! P_FUD -----Original Message----- From: Fitch, Brian (ISS Atlanta) [mailto:[EMAIL PROTECTED]] Sent: Thursday, January 24, 2002 9:19 AM To: 'mechfox mechfox'; [EMAIL PROTECTED] Subject: RE: Network Sensor problem TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to [EMAIL PROTECTED] Contact [EMAIL PROTECTED] for help with any problems! ---------------------------------------------------------------------------- You need to configure your Event Collector to pull the datastream from the network sensor. This is accomplished by going into the properties of the Event Collector and adding the sensor(s). Reference the Workgroup Manager section on "Configuring Event Sources" for more assistance. -Brian -----Original Message----- From: mechfox mechfox [mailto:[EMAIL PROTECTED]] Sent: Wednesday, January 23, 2002 8:35 PM To: [EMAIL PROTECTED] Subject: Network Sensor problem TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to [EMAIL PROTECTED] Contact [EMAIL PROTECTED] for help with any problems! ---------------------------------------------------------------------------- I'm quite new with RealSecure. I'm currently installing Network Sensor 6 but it seems the WGM can't monitor the sensor because it keep on displaying this message "The Sensor is not being monitored by an EventCollector so the Event Channel can not be opened. Configure an EventCollector to monitor the sensor and verify that the EventCollector properly monitors the sensor. [ID=0xc72c0066]" I've already included it in my WGM as one of the sensors to be monitored but to no avail. Any idea what to do? Mechfox __________________________________________________ Do You Yahoo!? Great stuff seeing new owners in Yahoo! Auctions! http://auctions.yahoo.com _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp.
