TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to [EMAIL PROTECTED] Contact [EMAIL PROTECTED] for help with any problems! ----------------------------------------------------------------------------
"Knei�l, Thomas" wrote: > > Hello, > > a firewall, which is utilizing NAT, is between the Console and the Sensor, > after consulting the knowledge base we got the following information: > > When monitoring a sensor through a firewall utilizing NAT, the Console is > unable to connect to the event channel for the sensor. This results from the > sensor passing the wrong Event Collector IP address to the Console. You will > receive an error stating that the connection attempt has timed out. > > Now the question, are there some other solutions (the OS-Sensor is running > on AIX 4.3.3) at all instead of the suggested workaround (running a script, > avaible only for Solaris and Windows, which is continuously changing the > real IP address to the NAT address). > Hello Thomas, we are in a similiar situation from our layout. But we are using in place of NAT the plug-gw from the FWTK (FireWall ToolKit). It gives you the same functionality ... with other drawbacks. If any of the machines go offline (ie for reboot) the Console has still a valid TCP connection to the machine running the plug-gw. The Sensor comes back online sometimes later. It would not help to reconnect to the Sensor. You must stop and again start the monitoring. This is the only drawback we found. Hope that helps Marc __________________________________________________________________ Gesendet von Yahoo! Mail - http://mail.yahoo.de Ihre E-Mail noch individueller? - http://domains.yahoo.de
