TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to [EMAIL PROTECTED] Contact [EMAIL PROTECTED] for help with any problems! ----------------------------------------------------------------------------
Hi, Anwser to the second question: Stop the issdaemon, delete the current.policy, start the issdaemon. Connect to the sensor. Now it shows that the sensor is using a default policy. Apply the new policy again. This should work. Ave, JHS -----Original Message----- From: Exchange Administrator [mailto:[EMAIL PROTECTED]] Sent: Tuesday, February 05, 2002 5:44 AM To: [EMAIL PROTECTED] Subject: Server Sensor 6.5 upgrade TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to [EMAIL PROTECTED] Contact [EMAIL PROTECTED] for help with any problems! ---------------------------------------------------------------------------- Recently an upgrade of real secure server sensors took place on our network. The server sensors were upgraded on a number of servers without encountering any major problems. However while trying to install the upgrade on the Mailsweeper for smtp server, the installation failed. Since this time we have not been able to start the issdaemon service on the Mailsweeper server. The error we are receiving when trying to start the issdaemon service is : The issdaemon service terminated with service-specific error 4294967295 We were upgrading from version 6.0 to 6.5 After doing a file comparison we have found there is no BlackICE service installed on the mailsweeper box and a number of the files (blackd.exe included)have not been upgraded. Is anyone aware of any issues that relate to this error and / or installing ISS server sensors on Mailsweeper for SMTP? Also when ever we launch the console we receive the following error from the upgraded sensors "The sensors common policy file was not sucessfully transferred when the control channel was opened and therefore it is not available to the application. This is usually due to a problem reading the file from the sensor after opening the control channel." The control channel error flag can be cleared and everything operates ok until the next time the console is launched. Any ideas why this may be happening? --------------------------------------------- http://mail.indiainfo.com India's first ISO certified portal Check world time at http://time.indiainfo.com
