TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to [EMAIL PROTECTED] Contact [EMAIL PROTECTED] for help with any problems! ----------------------------------------------------------------------------
Hi friends: Someone know about this: I have the following configuration: Machine 1: Event Colector and Master Console Machine 2: SQL (Master DataBase and Asset DataBAse) Machine 3: Network Sensor (with two NIC one with IP 1.1.1.1 on external segment and the other IP Internal) Machine 4: Network Sensor (with two NIC one with IP 1.1.1.2 on external segmentand the other IP Internal) On other place I have two secondary consoles Machine 5: Secondary Console (W2K) Machine 6: Secondary Console (Laptop with XP) I have put the correct key from each console on the EventCollector and each NetworkSensor. All management keys and administartion keys are in the right place on each sensor. I can monitor all the sensor and EvenCollector from any Console (Machine 1, Machine 2 and Machine 3) and I can "Revoke" and "Set Master Console" from any Console too. When I tested the ODBC connections from each console to Master DataBase and Asset DataBase, the result was successfully. When I use the Machine 1 for monitoring the two sensors I see the event on each sensor without problems. But when I try monitoring the sensor from the others consoles I can�t see any events on the sensor. This is very strange because I can connect to the sensors from this consoles and I can "Revoke" and "Set Master console". But I don�t see any data. When I review the log from the each server properties I don�t see any strange messages. I only could see once the events from one sensor on the Machine 5 (Secondary console), the data appeared very fast and in a large amount but afterwards it stopped and no more events are displayed again. What file I should review for detect the problem, or what message do you need for solve this case. On Each Sensor I have: Three key from the consoles one key from EventCollector On the EventCollector I have: Three key from the consoles For this reason I can connect to the each sensors from any console (remenber i hace three console one master and two secondary). But the Secondary console display any events but the sensor appear like connect, and I can apply policies, change policies, change responses and anything, for all sensor but I can�t see events. This is the problem I can�t see events. Regards.
