|
Hi don, Thanks for replying. We are using Stonebeat full cluster and its o.k I am looking for a solution to monitoring three segment for the lan network with
one sensor. The first thing coming up is connect it to a
switch and mirror all segment traffic to the ids port. The problem with this solution is the spanning
tree on the switch. If you disable the spanning tree on the switch
it's hangs. So for now I am working with hub but I am losing information.
Thanks Best Regards Avi Ganon Information Security Tel: 972-9-9614540 Cell: 972-58-741717 -----Original
Message----- Shalom Alechem. We
did it. We had it running for a few years. Stonebeat works great
once you set it up but it is VERY difficult to set up. I would recommend
avoiding it. -----Original
Message----- Hi all, Could someone provide me their
opinions based on their own experiences with implementing Real Secure in Stone Beat Full Cluster environment: For example: three fw1 in cluster,
three interfaces for each segment , LAN , dmz, etc... I'm not using span port instead I'm
using Shomiti Taps. How I can monitor all traffic for
the LAN network with only one network sensor for three LAN interfaces? Thanks Best Regards Avi Ganon Information Security Tel: 972-9-9614540 Cell: 972-58-741717 --------------------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------------------------- |
