Eduardo P. O.,
At a minimum, you're going to have to modify the
system's registry to change the application server portion of SiteProtector to
the new machine name and IP address (see the ISS knowledge
base). Also, if you've installed the network and server sensors and
used the old machine name and the key administrator, you need to modify the
master status entry is the iss.access and issdaemon.policy files on the
sensors and stop/start the issdaemon service on the
sensors.
You may also need to '"reassociate" the sensor to
the event collector portion of your single-server SiteProtector using the
Console GUI.
Robert J. Craig, CISM, CISSP, SSCP
Senior Security
Engineer
NETSEC
13525 Dulles Technology Drive
Herndon, VA
20171
(703) 561-0420
(703) 832-4505 fax
[EMAIL PROTECTED]
http://www.netsec.net
Your Network
Security Solution.
=======================================
This electronic
message contains information from NETSEC or its affiliates, which may be
confidential, proprietary or otherwise protected from disclosure. The
information is intended to be used solely by the recipient(s) named above for
the purposes intended by the originator. If you are not an intended recipient,
be aware that any review, disclosure, copying, distribution or use of this
transmission or its contents is prohibited. If you have received this
transmission in error, please notify us immediately by telephone at (703)
561-0420, or by electronic mail at [EMAIL PROTECTED]
Hi all:
One of my clients installed SP 2.0 on W2K
Server With 1xIS 7.0, 3xNS 7.0, 8xSS 6.5 .
Everything is working fine.
The problem is that in order to deliver to
production it is necessary to change both the Server Name and the
IP.
The installation was done using Basic
Installation.
Can he change the Server Name? The Server IP?
Both?
If this is possible what and where has to be
done?
Your kind help will be much
appreciated
Thanks and Regards
Eduardo P. O.
| 