Github user StephanEwen commented on a diff in the pull request:
https://github.com/apache/flink/pull/3217#discussion_r98663201
--- Diff: docs/ops/upgrading.md ---
@@ -25,13 +25,87 @@ under the License.
* ToC
{:toc}
-## Upgrading Flink Streaming Applications
+Flink DataStream programs are typically designed to run for long periods
of time such as weeks, months, or even years. As with all long-running
services, Flink streaming applications need to be maintained, which includes
fixing bugs, implementing improvements, or migrating an application to a Flink
cluster of a later version.
- - Savepoint, stop/cancel, start from savepoint
- - Atomic Savepoint and Stop (link to JIRA issue)
+This document describes how to update a Flink streaming application and
how migrate a running streaming application to a different Flink cluster.
- - Limitations: Breaking chaining behavior (link to Savepoint section)
- - Encourage using `uid(...)` explicitly for every operator
+## Restarting Streaming Applications
+
+The line of action for upgrading a streaming application or migrating an
application to a different cluster is based on Flink's [Savepoint]({{
site.baseurl }}/setup/savepoints.html) feature. A savepoint is a consistent
snapshot of the state of an application at a specific point in time.
+
+There are two ways of taking a savepoint from a running streaming
application.
+
+* Taking a savepoint and continue processing.
+```
+> ./bin/flink savepoint <jobID> [pathToSavepoint]
+```
+It is recommended to periodically take savepoints in order to be able to
restart an application from a previous point in time.
+
+* Taking a savepoint and stopping the application as a single action.
+```
+> ./bin/flink cancel -s [pathToSavepoint] <jobID>
+```
+This means that the application is canceled immediately after the
savepoint completed, i.e., no other checkpoints are taken after the savepoint.
+
+Given a savepoint taken from an application, the same or a compatible
application (see [Application State
Compatibility](#application-state-compatibility) section below) can be started
from that savepoint. Starting an application from a savepoint means that the
state of its operators is initialized with the operator state persisted in the
savepoint. This is done by starting an application using a savepoint.
+```
+> ./bin/flink run -d -s [pathToSavepoint] ~/application.jar
+```
+
+The operators of the started application are initialized with the operator
state of the original application (i.e., the application the savepoint was
taken from) at the time when the savepoint was taken. The started application
continues processing from exactly this point on.
+
+**Note**: Even though Flink consistently restores the state of an
application, it cannot revert writes to external systems. This can be an issue
if you resume from a savepoint that was taken without stopping the application.
In this case, the application has probably emitted data after the savepoint was
taken. The restarted application might (depending on whether you changed the
application logic or not) emit the same data again. The exact effect of this
behavior can be very different depending on the `SinkFunction` and storage
system. Data that is emitted twice might be OK in case of idempotent writes to
a key-value store like Cassandra but problematic in case of appends to a
durable log such as Kafka. In any case, you should carefully check and test the
behavior of a restarted application.
+
+## Application State Compatibility
+
+When upgrading an application in order to fix a bug or to improve the
application, usually the goal is to replace the application logic of the
running application while preserving its state. We do this by starting the
upgraded application from a savepoint which was taken from the original
application. However, this does only work if both applications are *state
compatible*, meaning that the operators of upgraded application are able to
initialize their state with the state of the operators of original application.
+
+In this section, we discuss how applications can be modified to remain
state compatible.
+
+### Matching Operator State
+
+When an application is restarted from a savepoint, Flink matches the
operator state stored in the savepoint to stateful operators of the started
application. The matching is done based on operator IDs, which are also stored
in the savepoint. Each operator has a default ID that is derived from the
operator's position in the application's operator topology. Hence, an
unmodified application can always be restarted from one of its own savepoints.
However, the default IDs of operators are likely to change if an application is
modified. Therefore, modified applications can only be started from a savepoint
if the operator IDs have been explicitly specified. Assigning IDs to operators
is very simple and done using the `uid(String)` method as follows:
+
+```
+val mappedEvents: DataStream[(Int, Long)] = events
+ .map(new MyStatefulMapFunc()).uid(âmapper-1â)
+```
+
+**Note:** Since the operator IDs stored in a savepoint and IDs of
operators in the application to start must be equal, it is highly recommended
to assign unique IDs to all operators of an application that might be upgraded
in the future. This advice applies to all operators, i.e., operators with and
without explicitly declared operator state, because some operators have
internal state that is not visible to the user. Upgrading an application
without assigned operator IDs is significantly more difficult and may only be
possible via a low-level workaround using the `setUidHash()` method.
+
+By default all state stored in a savepoint must be matched to the
operators of a starting application. However, users can explicitly agree to
skip (and thereby discard) state that cannot be matched to an operator when
starting a application from a savepoint. Stateful operators for which no state
is found in the savepoint are not initialized with their default state.
--- End diff --
Typo (I think the __ not __ is incorrect)? "Stateful operators for which no
state is found in the savepoint are __ not __ initialized with their default
state."
---
If your project is set up for it, you can reply to this email and have your
reply appear on GitHub as well. If your project does not have this feature
enabled and wishes so, or if the feature is enabled but not working, please
contact infrastructure at [email protected] or file a JIRA ticket
with INFRA.
---
