https://issues.apache.org/ooo/show_bug.cgi?id=124737
Regina Henschel <[email protected]> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |[email protected] --- Comment #11 from Regina Henschel <[email protected]> --- I do not understand your problem. The document Envelope2.odt should work. Insert the envelope as the printer guide describes it, with the short edge first and the side to be printed top. The content should be turned automatically. Have you tried it? I don't know any case, where it is necessary to turn the scripting. (It is the same as with normal documents. When your document has DinA4 landscape, you do not need an A3 printer, but the content is turned automatically to be printed on the portrait A4 paper.) If it does not work, please fill the whole document (still #10 in landscape) without any margins with dummy text and print it, with the paper feed as the printer guide describes. Then make a picture of the result and attach it. In same rare cases the alignment of the envelope in the paper tray is wrong detected and it is needed to increase the height of the document and set a dummy margin. Do not forget to have a careful look at the preview in the printer dialog. If the preview does not show the correct width and height, you have to set the paper size and orientation in the printer properties. Find the button on the "General" tab of the dialog. -- You are receiving this mail because: You are the assignee for the issue. You are watching all issue changes.
