https://bz.apache.org/ooo/show_bug.cgi?id=127002
anies2...@my.fit.edu changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |anies2...@my.fit.edu --- Comment #1 from anies2...@my.fit.edu --- Configuration: OS: Windows 10 Pro Version 10.0.14393 Build 1493 RAM: 16gb CPU: AMD FX8350 GPU: AMD Radeon 390 Display: 3x 1080p, Horizontal Keyboard: US, QWERTY Software Versions Tested: - Version 4.1.2: AOO412m3(Build:9782) - Rev. 1709696 2015-10-21 09:53:29 (Mi, 21 Okt 2015) - Version 4.2.0: AOO420m1(Build:9800) - Rev. 1761251 Rev.1761251 Steps: 1) “Tools” -> “Options” -> “Office Writer” -> “General” -> “Settings” -> “Measurement unit” = “Millimeter” 2) “Properties (side panel)” -> “Above Paragraph Spacing” -> select entire input box contents NOTE) The following steps 'a' through 'l' are all taken directly after step #2. Steps not marked 'CORRECT' produced unexpected or erroneos output. a) Input: “0.03” -> wait -> number changes to “0.04 mm” b) Input: “0.13” -> wait -> number changes to “0.12 mm” c) Input: “99.67” -> wait -> number changes to “99.68 mm” d) Input: “98.67” -> wait -> number CORRECTLY changes to “98.67 mm” e) Input: “100.67” -> wait -> number CORRECTLY changes to the max “100.01 mm” f) Input: “1.67” -> wait -> number changes to “1.68 mm” g) Input: “2.67” -> wait -> number changes to “2.66 mm” h) Input: “3.67” -> wait -> number CORRECTLY changes to “3.67 mm” i) Quickly input: “100” -> wait -> number changes to “99.99 mm” j) Input: “9” three times slowly -> number CORRECTLY changes to the max “100.01 mm” k) Input: “2” two times slowly -> number changes to the max “12.98 mm” l) Input: “5” two times slowly -> number changes to the max “45.98 mm” Besides the "Above Paragraph Spacing" input field, I also tested the following related fields: - "Below Paragraph Spacing" - "Before Text Indent" - "After Text Indent" - "First Line Indent" The related fields showed the same failures, adjusted for their max values. Testing with measurements in Inches and centimeters (step #1) did not produce the unexpected values listed above for Millimeters. Multi-character numbers entered at a speed of ~9600KPH (keystrokes per hour) or less produce unexpected results. Inputs starting with '2' or '5' demonstrates the issue (ex. Step #k and #l). Example with input "22" at a speed lower than ~9600KPH: 1) Input "2", the number changes to "1.99 mm" 2) Input second "2", the number changes to "12.99 mm" 3) Finally, the number then changes to "12.98 mm" NOTE: Various sources state the average KPH is between 5,000KPH and 10,000KPH. - http://unstats.un.org/unsd/demographic/sources/census/wphc/docs/CensusDataCaptureMethodology.pdf - http://www.learn2type.com/typingtest/tenkeyspeed.cfm Failure effects similar features of the following and possibly related bug: https://bz.apache.org/ooo/show_bug.cgi?id=127001 -- You are receiving this mail because: You are the assignee for the issue.