[
https://issues.apache.org/jira/browse/HDDS-9823?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel
]
Ivan Andika updated HDDS-9823:
------------------------------
Description:
XceiverServerRatis#handlePipelineFailure is called in CSM failure scenarios
* XceiverServerRatis#handleNodeSlowness
** From StateMachine#notifyFollowerSlowness
* XceiverServerRatis#handleNoLeader
** From StateMachine#notifyExtendedNoLeader
* XceiverServerRatis#handleInstallSnapshotFromLeader
** From StateMachine#notifyInstallSnapshotFromLeader
The possible issue is that XceiverServerRatis#handlePipelineFailure does not
trigger Heartbeat to SCM immediately. Instead, it waits until the next
heartbeat (default 60s) to send the pipeline close action command. This might
cause SCM to still allocate blocks to these "failed" pipelines during this
duration which might impact on client writing to these blocks.
To minimize the impact on client. I suggest that the datanode trigger the
pipeline close command immediately for every pipeline action close command
triggered due to pipeline failure.
was:
XceiverServerRatis#handlePipelineFailure is called in CSM failure scenarios
* XceiverServerRatis#handleNodeSlowness
** From StateMachine#notifyFollowerSlowness
* XceiverServerRatis#handleNoLeader
** From StateMachine#notifyExtendedNoLeader
* XceiverServerRatis#handleInstallSnapshotFromLeader
** From StateMachine#notifyInstallSnapshotFromLeader
The possible issue is that XceiverServerRatis#handlePipelineFailure does not
trigger Heartbeat to SCM immediately. Instead, it waits until the next
heartbeat (default 60s) to send the pipeline close action command. This might
cause SCM to still allocate blocks to these "failed" pipelines during this
duration which might impact on client writing to these blocks.
To minimize the impact on client. I suggest that the datanode trigger the
pipeline close command immediately for every pipeline action close command
triggered due to pipeline failure.
> Pipeline failure should trigger heartbeat immediately
> -----------------------------------------------------
>
> Key: HDDS-9823
> URL: https://issues.apache.org/jira/browse/HDDS-9823
> Project: Apache Ozone
> Issue Type: Improvement
> Components: Ozone Datanode, SCM
> Reporter: Ivan Andika
> Assignee: Ivan Andika
> Priority: Major
>
> XceiverServerRatis#handlePipelineFailure is called in CSM failure scenarios
> * XceiverServerRatis#handleNodeSlowness
> ** From StateMachine#notifyFollowerSlowness
> * XceiverServerRatis#handleNoLeader
> ** From StateMachine#notifyExtendedNoLeader
> * XceiverServerRatis#handleInstallSnapshotFromLeader
> ** From StateMachine#notifyInstallSnapshotFromLeader
> The possible issue is that XceiverServerRatis#handlePipelineFailure does not
> trigger Heartbeat to SCM immediately. Instead, it waits until the next
> heartbeat (default 60s) to send the pipeline close action command. This might
> cause SCM to still allocate blocks to these "failed" pipelines during this
> duration which might impact on client writing to these blocks.
> To minimize the impact on client. I suggest that the datanode trigger the
> pipeline close command immediately for every pipeline action close command
> triggered due to pipeline failure.
--
This message was sent by Atlassian Jira
(v8.20.10#820010)
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
