Hi Partners, Kindly let me know if you have any consultant for the following requirements.
Please respond back with an updated resume and all inclusive rates to [email protected] *Position: Solid Works & Costing tools Consultant * *Location: San Jose , CA* *Duration: 6 months * *The candidate should demonstrate ability to design, plan and execute development of electronic system packaging.* *Should understand sheet metal tooling and plastic injection mold process* *Should demonstrate knowledge in GD&T, process capability (Cpk) and statistical tolerance analysis* *Should be familiar with design for manufacturability (DFM)* *Should be familiar with 19-in rack system standard and data center environment.* *At least 10 years of experience in a CAD tool (over 2 years of using Pro/E Wildfire or CREO a must.)* *Familiar with Allegro PCB CAD tool and IDF conversion between mCAD and eCAD.* *Familiar with NEBS GR-63 and MIL-STD-810 or other environmental test standard and process.* *Experience in using high speed backplane connectors* *Skill Sets* *Domain: Manufacturing* *Understanding of the Mechanical sub components in electronic/electrical devices* *Investigate on alternates for a low cost solution.* *Provide proposal with ROI and cost savings.* *Mechanical Value engineering for product.* *Exposure to the cisco process is a big plus.* Thanks & Regards Raja Burgeon IT Services LLC. 619 New York Avenue, Claymont, DE 19703 Phone No. : 302-338-9683 EXT 301 302-220-4724, Fax : 302-355-1559 Email Id : [email protected] Website: www.burgeonits.com -- You received this message because you are subscribed to the Google Groups "it req" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/it-req. For more options, visit https://groups.google.com/d/optout.
