It's not possible to put FNC1 in the middle of a code as it is. The only possibility is to generate UCC/EAN-128 that has an FNC1 in the start.
Best Regards, Paulo Soares > -----Original Message----- > From: Emmanuel Hugonnet [SMTP:[EMAIL PROTECTED] > Sent: Monday, September 22, 2003 16:17 > To: [EMAIL PROTECTED] > Subject: [iText-questions] EAN 128 BarCode > > Hi, > I have a problem with EAN128 BarCode. > My code is (241)3240690058289(37)00000500(422)356 > If i write it without any FNC1 it 's wrong. > If I write it 2413240690058289 + FNC1 + 3700000500 + FNC1 +422356 > it is almost good but for a 'f' character instead of the FNC1. I did > some research and I found that the FNC1 > character is not the 102 but the 202 in ASCII. 102 seems to be from > another character table. But if I change FCN1 to > 202 and if I bypass the security about character beeing under 127, it > still doesn't work. I tried to change 202 to 102 > when getting the value from BARS but it still doesn't work. Since I > don't understand the BARS array and how to put > the 202 value in it and how the bars array is computed I 'm stucked. > Thanks for any help. > Emmanuel > > > > ------------------------------------------------------- > This sf.net email is sponsored by:ThinkGeek > Welcome to geek heaven. > http://thinkgeek.com/sf > _______________________________________________ > iText-questions mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/itext-questions ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ iText-questions mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/itext-questions
