2013/8/2 Tomasz Olszak <[email protected]> > 2013/8/2 VanCutsem, Geoffroy <[email protected]> > > Hi Tomasz,**** >> >> ** ** >> >> I don’t know whether running Tizen in VMware is the best environment for >> you but it sounds like at a bare minimum you should be able to have a more >> complete environment than the one you describe below. I have embedded some >> comments/things for you to try below.**** >> >> ** ** >> >> Thanks,**** >> >> Geoffroy**** >> >> ** ** >> >> *From:* [email protected] [mailto:[email protected]] >> *On Behalf Of *Tomasz Olszak >> *Sent:* Monday, July 22, 2013 1:04 PM >> *To:* [email protected] >> *Subject:* Running Tizen IVI in VMWare Workstation**** >> >> ** ** >> >> Hi,**** >> >> ** ** >> >> I plan to port Qt for Tizen IVI and need some working environment. I >> already tried using VMWare Workstation 9.0 [1] but had following issues.* >> *** >> >> - avsystem.service problem: >> "Failed to start Start av system. >> See `systemctl status avsystem.service` for details." >> systemctl status avsystem.service returned [2].**** >> >> [Geoffroy] I still need to try this on my environment but could you also >> check with the latest monthly preview if this problem is still present?** >> ** >> >> - Release notes: https://wiki.tizen.org/wiki/IVI/IVI_July_29,_3.0-M2-Jul >> **** >> >> - Some instructions for VMware: >> https://wiki.tizen.org/wiki/IVI/IVI_3.0_VMware **** >> >> - I tried to run app with launch_app and got [3]. I changed >> ELM_ENGINE and ECORE_EVAS_ENGINE to wayland_shm but with no luck.**** >> >> [Geoffroy] GhostCluster is a WebApp so you should try to launch it using >> wrt- - see also this section: >> https://wiki.tizen.org/wiki/IVI/IVI_July_29,_3.0-M2-Jul#How_to_start_a_WebApp >> **** >> >> - When I invoked weston --use-pixman the OS hangs. I can't change >> terminal etc and interact with active one.**** >> >> [Geoffroy] We can definitely see Weston and start a terminal under >> VMware. Make sure that 3D acceleration is turned on for Workstation because >> otherwise it Weston won’t start. Please also note the tip in case you are >> running VMware Workstation under Linux on a system with an Intel Graphics >> card -- >> https://wiki.tizen.org/wiki/IVI/IVI_3.0_VMware#Setting_up_VMware.C2.AE_on_your_host >> **** >> >> I use Linux Ubuntu 13.10 as VMWare Workstation doesn't see my integrated >> sound card. So am I right thinking that I can't run Tizen IVI apps when >> host sound card is not exposed to guest OS?**** >> >> [Geoffroy] I guess if VMware does not see your soundcard then it won’t be >> able to expose it to the Virtual Machines. Note however that until the >> Tizen IVI 3.0-M2-Jul preview, the Tizen kernel did not include the sound >> card driver required to recognised the sound card emulated by VMware… this >> is now fixed if you try this latest release.**** >> >> ** ** >> >> I also will be very thankful if someone will propose a way to create >> environment to run and test Qt and Qt apps on Tizen IVI (maybe VM is not >> the best for this case).**** >> >> ** ** >> >> [1] https://wiki.tizen.org/wiki/IVI/IVI_3.0_VMware**** >> >> [2] http://pasteboard.co/1h1u9Oyl.png**** >> >> [3] http://pasteboard.co/1h241gQk.png**** >> >> -- **** >> >> regards / pozdrawiam, Tomasz Olszak**** >> >> Qt for Tizen | http://qt-project.org/wiki/Tizen**** >> >> Qt Certified Developer | http://qt-project.org >> http://linkedin.com/in/tolszak**** >> >> Intel Corporation NV/SA >> Kings Square, Veldkant 31 >> 2550 Kontich >> RPM (Bruxelles) 0415.497.718. >> Citibank, Brussels, account 570/1031255/09 >> >> This e-mail and any attachments may contain confidential material for the >> sole use of the intended recipient(s). Any review or distribution by others >> is strictly prohibited. If you are not the intended recipient, please >> contact the sender and delete all copies. >> > Thank you Geoffroy, > I will check once again according to your suggestions and sent an update > in few days. > > -- > regards, > Tomasz Olszak > Qt for Tizen | http://qt-project.org/wiki/Tizen > Qt Certified Developer | http://qt-project.org > http://linkedin.com/in/tolszak >
I was able to run M2 image on Ubuntu. However I need to use Windows for development because VMWare Player is free for non commercial use and Workstation is not. Don't you know if VMWare Player HW graphics acceleration support is going change in the future? -- regards, Tomasz Olszak
_______________________________________________ IVI mailing list [email protected] https://lists.tizen.org/listinfo/ivi
